# Commission Implementing Decision (EU) 2020/480 of 1 April 2020 amending Implementing Decision (EU) 2019/436 on harmonised standards for machinery drafted in support of Directive 2006/42/EC of the European Parliament and of the Council, Annex I

Extent: E+W+S+N.I.

Annex I to Implementing Decision (EU) 2019/436 is amended as follows:
(1) row 35 is replaced by the following:
‘
35.
EN 62841-2-1:2018
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery – Safety – Part 2-1: Particular requirements for hand-held drills and impact drills (IEC 62841-2-1:2017, Modified)
EN 62841-2-1:2018/A11:2019
C
’
(2) the following rows are added:
‘
43.
EN ISO 18497:2018
Agricultural machinery and tractors – Safety of highly automated agricultural machines – Principles for design (ISO 18497:2018)
B
44.
EN ISO 19353:2019
Safety of machinery – Fire prevention and fire protection (ISO 19353:2019)
B
45.
EN 707:2018
Agricultural machinery – Slurry tankers – Safety
C
46.
EN 1459-2:2015+A1:2018
Rough-terrain trucks – Safety requirements and verification – Part 2: Slewing variable-reach trucks
C
47.
EN ISO 3691-5:2015
Industrial trucks – Safety requirements and verification – Part 5: Pedestrian-propelled trucks (ISO 3691-5:2014)
C
48.
EN ISO 4254-9:2018
Agricultural machinery – Safety – Part 9: Seed drills (ISO 4254-9:2018)
C
49.
EN ISO 10517:2019
Powered hand-held hedge trimmers – Safety (ISO 10517:2019)
C
50.
EN ISO 11148-13:2018
Hand-held non-electric power tools – Safety requirements – Part 13: Fastener driving tools (ISO 11148-13:2017)
C
51.
EN 12012-1:2018
Plastics and rubber machines – Size reduction machines – Part 1: Safety requirements for blade granulators and shredders
C
52.
EN 12312-8:2018
Aircraft ground support equipment – Specific requirements – Part 8: Maintenance or service stairs and platforms
C
53.
EN 12733:2018
Agricultural and forestry machinery – Pedestrian controlled motor mowers – Safety
C
54.
EN 14033-4:2019
Railway applications – Track – Railbound construction and maintenance machines – Part 4: Technical requirements for running, travelling and working on urban rail
C
55.
EN 16712-4:2018
Portable equipment for projecting extinguishing agents supplied by firefighting pumps – Portable foam equipment – Part 4: High expansion foam generators PN16
C
56.
EN 16770:2018
Safety of woodworking machines – Chip and dust extraction systems for indoor installation – Safety requirements
C
57.
EN 16985:2018
Spray booths for organic coating material – Safety requirements
C
58.
EN 17067:2018
Forestry machinery – Safety requirements on radio remote controls
C
59.
EN ISO 19296:2018
Mining – Mobile machines working underground – Machine safety (ISO 19296:2018)
C
60.
EN ISO 28927-4:2010
Hand-held portable power tools – Test methods for evaluation of vibration emission – Part 4: Straight grinders (ISO 28927-4:2010)
EN ISO 28927-4:2010/A1:2018
C
61.
EN 60204-1:2018
Safety of machinery – Electrical equipment of machines – Part 1: General requirements (IEC 60204-1:2016, Modified)
B
62.
EN IEC 60204-11:2019
Safety of machinery – Electrical equipment of machines – Part 11: Requirements for equipment for voltages above 1 000 V AC or 1 500 V DC and not exceeding 36 kV (IEC 60204-11:2018)
B
63.
EN 62841-4-2:2019
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery – Safety – Part 4-2: Particular requirements for hedge trimmers (IEC 62841-4-2:2017, Modified)
C
64.
EN 62841-3-12:2019
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery – Safety – Part 3-12: Particular requirements for transportable threading machines (IEC 62841-3-12:2017)
C
65.
EN 62841-2-21:2019
Electric motor-operated hand-held tools, transportable tools and lawn and garden machinery – Safety – Part 2-21: Particular requirements for hand-held drain cleaners (IEC 62841-2-21:2017, Modified)
C
66.
EN ISO 20607:2019
Safety of machinery – Instruction handbook – General drafting principles (ISO 20607:2019)
B
67.
EN ISO 19085-7:2019
Woodworking machines – Safety – Part 7: Surface planing, thickness planing, combined surface/thickness planing machines (ISO 19085-7:2019)
C
68.
EN 1114-3:2019
Plastics and rubber machines – Extruders and extrusion lines – Part 3: Safety requirements for haul-offs
C
69.
EN 1127-1:2019
Explosive atmospheres – Explosion prevention and protection – Part 1: Basic concepts and methodology
B
’

---
Source: https://www.legislation.gov.uk/eudn/2020/480/annex/I (the official version)
Page: https://openlegislation.uk/eu-decision-2020-480/annex-I
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.