Annex II
United Kingdom
In Annex III to Implementing Decision (EU) 2019/436, the following rows are added:
‘
39. EN ISO 28927-4:2010
Hand-held portable power tools – Test methods for evaluation of vibration emission – Part 4: Straight grinders (ISO 28927-4:2010)
2 April 2020 C 40. EN ISO 19353:2016
Safety of machinery – Fire prevention and fire protection (ISO 19353:2015)
2 October 2021 B 41. EN 707:1999+A1:2009
Agricultural machinery – Slurry tankers – Safety
2 October 2021 C 42. EN 792-13:2000+A1:2008
Hand-held non-electric power tools – Safety requirements – Part 13: Fastener driving tools
2 October 2021 C 43. EN 1889-1:2011
Machines for underground mines – Mobile machines working underground – Safety – Part 1: Rubber tyred vehicles
2 October 2021 C 44. EN ISO 3691-5:2014
Industrial trucks – Safety requirements and verification – Part 5: Pedestrian-propelled trucks (ISO 3691-5:2014)
EN ISO 3691-5:2014/AC:2014
2 October 2021 C 45. EN ISO 10517:2009
Powered hand-held hedge trimmers – Safety (ISO 10517:2009)
EN ISO 10517:2009/A1:2013
2 October 2021 C 46. EN 12012-1:2007+A1:2008
Plastics and rubber machines – Size reduction machines – Part 1: Safety requirements for blade granulators
2 October 2021 C 47. EN 12012-3:2001+A1:2008
Plastics and rubber machines – Size reduction machines – Part 3: Safety requirements for shredders
2 October 2021 C 48. EN 12312-8:2005+A1:2009
Aircraft ground support equipment – Specific requirements – Part 8: Maintenance stairs and platforms
2 October 2021 C 49. EN 12733:2001+A1:2009
Agricultural and forestry machinery – Pedestrian controlled motor mowers – Safety
2 October 2021 C 50. EN 12981:2005+A1:2009
Coating plants – Spray booths for application of organic powder coating material – Safety requirements
2 October 2021 C 51. EN 13355:2004+A1:2009
Coating plants – Combined booths – Safety requirements
2 October 2021 C 52. EN 14018:2005+A1:2009
Agricultural and forestry machinery – Seed drills – Safety
2 October 2021 C 53. EN 60204-1:2006
Safety of machinery – Electrical equipment of machines – Part 1: General requirements (IEC 60204-1:2005, Modified)
EN 60204-1:2006/AC:2010
EN 60204-1:2006/A1:2009
2 October 2021 B 54. EN 60204-11:2000
Safety of machinery – Electrical equipment of machines – Part 11: Requirements for HV equipment for voltages above 1 000 V a.c. or 1 500 V d.c. and not exceeding 36 kV (IEC 60204-11:2000)
EN 60204-11:2000/AC:2010
2 October 2021 B 55. EN 848-3:2012
Safety of woodworking machines – One side moulding machines with rotating tool – Part 3: Numerically controlled (NC) boring and routing machines
2 October 2021 C 56. EN ISO 28927-2:2009
Hand-held portable power tools – Test methods for evaluation of vibration emission – Part 2: Wrenches, nutrunners and screwdrivers (ISO 28927-2:2009)
2 October 2021 C 57. EN 60745-2-21:2009
Hand-held motor-operated electric tools – Safety – Part 2-21: Particular requirements for drain cleaners (IEC 60745-2-21:2002, Modified)
EN 60745-2-21:2009/A1:2010
2 October 2021 C 58. EN 859:2007+A2:2012
Safety of woodworking machines – Hand fed surface planing machines
2 October 2021 C 59. EN 860:2007+A2:2012
Safety of woodworking machines – One side thickness planing machines
2 October 2021 C 60. EN 861:2007+A2:2012
Safety of woodworking machines – Surface planing and thicknessing machines
2 October 2021 C 61. EN 1114-3:2001+A1:2008
Plastics and rubber machines – Extruders and extrusion lines – Part 3: Safety requirements for haul-offs
2 October 2021 C 62. EN 1127-1:2011
Explosive atmospheres – Explosion prevention and protection – Part 1: Basic concepts and methodology
2 October 2021 B 63. EN 1459-2:2015
Rough-terrain trucks – Safety requirements and verification – Part 2: Slewing variable-reach trucks
2 October 2021 C ’