Annex I
United Kingdom
Annex I to Implementing Decision (EU) 2019/1616 is amended as follows:
- (1)
entry No 8 is replaced by the following:
‘
8. EN 13445-3:2014
Unfired pressure vessels – Part 3: Design
EN 13445-3:2014/A1:2015
EN 13445-3:2014/A2:2016
EN 13445-3:2014/A3:2017
EN 13445-3:2014/A4:2018
EN 13445-3:2014/A5:2018
EN 13445-3:2014/A6:2019
EN 13445-3:2014/A7:2019
EN 13445-3:2014/A8:2019
’
- (2)
the following entries are added:
No Reference of the standard ‘15. EN ISO 4126-1:2013
Safety devices for protection against excessive pressure – Part 1: Safety valves (ISO 4126-1:2013)
EN ISO 4126-1:2013/A2:2019
16. EN 10217-1:2019
Welded steel tubes for pressure purposes – Technical delivery conditions – Part 1: Electric welded and submerged arc welded non-alloy steel tubes with specified room temperature properties
17. EN 10217-2:2019
Welded steel tubes for pressure purposes – Technical delivery conditions – Part 2: Electric welded non-alloy and alloy steel tubes with specified elevated temperature properties
18. EN 10217-3:2019
Welded steel tubes for pressure purposes – Technical delivery conditions – Part 3: Electric welded and submerged arc welded alloy fine grain steel tubes with specified room, elevated and low temperature properties
19. EN 10217-4:2019
Welded steel tubes for pressure purposes – Technical delivery conditions – Part 4: Electric welded non-alloy steel tubes with specified low temperature properties
20. EN 10217-5:2019
Welded steel tubes for pressure purposes – Technical delivery conditions – Part 5: Submerged arc welded non-alloy and alloy steel tubes with specified elevated temperature properties
21. EN 10217-6:2019
Welded steel tubes for pressure purposes – Technical delivery conditions – Part 6: Submerged arc welded non-alloy steel tubes with specified low temperature properties
22. EN 13480-1:2017
Metallic industrial piping – Part 1: General
EN 13480-1:2017/A1:2019
23. EN 13480-6:2017
Metallic industrial piping – Part 6: Additional requirements for buried piping
EN 13480-6:2017/A1:2019’.