Division 4.2 F1

The EC type-approval mark shall consist of a rectangle surrounding the lower case letter ‘ e ’ followed by the distinguishing letter(s) or number of the Member State which has granted the approval:

• ‘ 1 ’ for Germany

• ‘ 2 ” for France

• ‘ 3 ’ for Italy

• ‘ 4 ’ for the Netherlands

• ‘ 5 ’ for Sweden

• ‘ 6 ’ for Belgium

• ‘ 7 ’ for Hungary

• ‘ 8 ’ for the Czech Republic

• ‘ 9 ’ for Spain

• ‘ 11 ’ for the United Kingdom

• ‘ 12 ’ for Austria

• ‘ 13 ’ for Luxembourg

• ‘ 17 ’ for Finland

• ‘ 18 ’ for Denmark

• ‘ 19 ’ for Romania

• ‘ 20 ’ for Poland

• ‘ 21 ’ for Portugal

• ‘ 23 ’ for Greece

• ‘ 24 ’ for Ireland

• F2‘ 25 ’ for Croatia

• ‘ 26 ’ for Slovenia

• ‘ 27 ’ for Slovakia

• ‘ 29 ’ for Estonia

• ‘ 32 ’ for Latvia

• ‘ 34 ’ for Bulgaria

• ‘ 36 ’ for Lithuania

• ‘ 49 ’ for Cyprus

• ‘ 50 ’ for Malta

It must also include in the vicinity of the rectangle the ‘ base approval number ’ contained in section 4 of the type-approval number referred to in Annex VII to Directive 70/156/EEC, preceded by the two figures indicating the sequence number assigned to the most recent major technical amendment to Council Directive 70/157/EEC which was applicable at the time of the vehicle type-approval. For Directive 70/157/ EEC, the sequence number is 00; for Directive 77/212/EEC the sequence number is 01; for Directive 84/424/EEC the sequence number is 02; for Directive 92/97/EEC and this Directive the sequence number is 03. Sequence number 03 reflects as well the technical requirements of the 00 series of amendments of UN/ECE Regulation No 59.