OpenLegislation

Division 6.5.1 Transfer to the flask a few pieces of porcelain or a few glass beads (5.10.1) and about 10 grams of the anhydrous potassium sulphate (4.2).

United Kingdom

Original text. Later amendments are not shown.

Add 0,2 g of the copper (II) sulphate (4.3) and wash down the neck of the flask with a little water. Add 20 ml of the concentrated sulphuric acid (4.1). Mix the contents of the flask.

Heat gently on the digestion apparatus (5.3) until any frothing has ceased, boil gently until the solution is clear and a pale green-blue colour persists. During heating, swirl the flask occasionally.

Continue the boiling, regulating the heating so as to condense the vapours in the middle of the flask neck. Continue the heating for 90 minutes avoiding local overheating.

Allow to cool to room temperature. Carefully add about 200 ml of water and a few pieces of pumice (5.10.2). Mix and cool again.