Division 1

8 is replaced by:

‘8.

EXTENSION OF EEC TYPE APPROVAL

8.1.

Vehicle types modified to run on unleaded petrol

8.1.1.

Subject to the approval of the authority granting type approval, approval of a vehicle type modified and/or adjusted solely for the purpose of making it capable of running on unleaded petrol, as specified in Directive 85/210/EEC, shall be extended under the following alternative conditions:

8.1.1.1.

The manufacturer shall certify that the engine power of the modified vehicle shall remain within the limits for conformity of production, as specified in 9.2 as obtained with the original, unmodified, type approved vehicle. In this case the extension shall confirm the power of the original type approval, or

8.1.1.2.

The manufacturer shall declare a revised engine power figure which is less than that obtained with the original, unmodified type approved vehicle. In this case the extension shall specify the newly declared figures as applicable to the modified vehicle type.

8.2.

Vehicle types modified for any other purpose

Any other modification of the engine with regard to the characteristics listed in Appendix 1 or Apendix 2 to this Annex shall be reported to the competent authority. That authority may then either:

8.2.1.

consider that the modifications made are not likely to have any substantial effect on the power of the engine, or

8.2.2.

request a further determination of engine power through the carrying-out of such tests as are deemed necessary.’