OpenLegislation

Annex IV CE CONFORMITY MARKING AND INFORMATIONF1

United Kingdom

Original text. Later amendments are not shown.

  • The CE conformity marking shall consist of the initials ‘ CE ’ taking the following form:

  • If the CE marking is reduced or enlarged the proportions given in the above graduated drawing must be respected.

  • The various components of the CE marking must have substantially the same vertical dimension, which may not be less than 5 mm. This minimum dimension may be waived for small-scale PPE.

F2. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

Annotations

Textual amendments

F1

Substituted by Council Directive 93/68/EEC of 22 July 1993 amending Directives 87/404/EEC (simple pressure vessels), 88/378/EEC (safety of toys), 89/106/EEC (construction products), 89/336/EEC (electromagnetic compatibility), 89/392/EEC (machinery), 89/686/EEC (personal protective equipment), 90/384/EEC (non-automatic weighing instruments), 90/385/EEC (active implantable medicinal devices), 90/396/EEC (appliances burning gaseous fuels), 91/263/EEC (telecommunications terminal equipment), 92/42/EEC (new hot-water boilers fired with liquid or gaseous fuels) and 73/23/EEC (electrical equipment designed for use within certain voltage limits).

F2

Deleted by Directive 96/58/EC of the European Parliament and the Council of 3 September 1996 amending Directive 89/686/EEC on the approximation of the laws of the Member States relating to personal protective equipment.