# Council Directive 1999/37/EC of 29 April 1999 on the registration documents for vehicles, Division: Back

Extent: E+W+S+N.I.

The back shall bear at least the remaining data specified in Chapter II.5; in accordance with Chapter II.7, individual national codes may be added to the preceding harmonised Community codes.
In detail, these data are:
Code
Reference
Vehicle Data (in consideration of the notes in Chapter II.5)
(D.1)
make
(D.2)
type (variant/version, where appropriate)
(D.3)
commercial description(s)
(E)
vehicle identification number
(F.1)
max. technically permissible laden mass, except for motorcycles (kg)
(G)
mass of the vehicle in service with bodywork, and with coupling device in the case of a towing vehicle in service from any category other than M1 (kg)
(H)
period of validity, if not unlimited
(K)
type-approval number (if available)
(P.1)
displacement (cm 3 )
(P.2)
nominal power (kW)
(P.3)
type of fuel or power source
(Q)
power/weight ratio (in kW/kg) (only for motorcycles)
(S.1)
number of seats, including driver's seat
(S.2)
number of standing places (where appropriate)
Optionally, additional data from II.6 (with the harmonised codes) and II.7 may be added on the back of the card.

---
Source: https://www.legislation.gov.uk/eudr/1999/37/annex/I/division/III/division/III.1/division/B/division/2 (the official version)
Page: https://openlegislation.uk/eu-directive-1999-37/annex-I/division-III/division-III.1/division-B/division-2
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.

