Division 24 Annex V, Part A, Section II, shall be amended as follows:

United Kingdom

(a)

point 1.10. is replaced by the following:

‘1.10.

Wood within the meaning of the first subparagraph of Article 2(2), where it

(a)

has been obtained in whole or part from

conifers (Coniferales), excluding wood which is bark-free,

Castanea Mill., excluding wood which is bark-free;

and

(b)

meets one of the following descriptions laid down in Annex I, Part two to Council Regulation (EEC) No 2658/87:

CN code Description
4401 10 00 Fuel wood, in logs, in billets, in twigs, in faggots or in similar forms
4401 21 00 Coniferous wood, in chips or particles
4401 22 00 Non-coniferous wood, in chips or particles
ex 4401 30 Wood waste and scrap (other than sawdust), not agglomerated in logs, briquettes, pellets or similar forms
ex 4403 10 00 Wood in the rough, treated with paint, stains, creosote or other preservatives, not stripped of bark or sapwood, or roughly squared
ex 4403 20 Coniferous wood in the rough, not stripped of bark or sapwood, or roughly squared, not treated with paint, stains, creosote or other preservatives
ex 4403 99 Non-coniferous wood (other than tropical wood specified in subheading note 1 to Chapter 44 or other tropical wood, oak (Quercus spp.) or beech (Fagus spp.)), in the rough, whether or not stripped of bark or sapwood, or roughly squared, not treated with paint, stains, creosote or other preservatives
ex 4404 Split poles: piles, pickets and stakes of wood, pointed, but not sawn lengthwise
4406 Railway or tramway sleepers (cross-ties) of wood
4407 10 Coniferous wood, sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or end-jointed, of a thickness exceeding 6 mm
ex 4407 99 Non-coniferous wood (other than tropical wood specified in subheading note 1 to Chapter 44 or other tropical wood, oak (Quercus spp.) or beech (Fagus spp.)), sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or end-jointed, of a thickness exceeding 6 mm.

’

(b)

point 1.11. is replaced by the following:

‘1.11.

Isolated bark of Castanea Mill, and conifers (Coniferales)’.

CN code	Description
4401 10 00	Fuel wood, in logs, in billets, in twigs, in faggots or in similar forms
4401 21 00	Coniferous wood, in chips or particles
4401 22 00	Non-coniferous wood, in chips or particles
ex 4401 30	Wood waste and scrap (other than sawdust), not agglomerated in logs, briquettes, pellets or similar forms
ex 4403 10 00	Wood in the rough, treated with paint, stains, creosote or other preservatives, not stripped of bark or sapwood, or roughly squared
ex 4403 20	Coniferous wood in the rough, not stripped of bark or sapwood, or roughly squared, not treated with paint, stains, creosote or other preservatives
ex 4403 99	Non-coniferous wood (other than tropical wood specified in subheading note 1 to Chapter 44 or other tropical wood, oak (Quercus spp.) or beech (Fagus spp.)), in the rough, whether or not stripped of bark or sapwood, or roughly squared, not treated with paint, stains, creosote or other preservatives
ex 4404	Split poles: piles, pickets and stakes of wood, pointed, but not sawn lengthwise
4406	Railway or tramway sleepers (cross-ties) of wood
4407 10	Coniferous wood, sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or end-jointed, of a thickness exceeding 6 mm
ex 4407 99	Non-coniferous wood (other than tropical wood specified in subheading note 1 to Chapter 44 or other tropical wood, oak (Quercus spp.) or beech (Fagus spp.)), sawn or chipped lengthwise, sliced or peeled, whether or not planed, sanded or end-jointed, of a thickness exceeding 6 mm.