OpenLegislation

Division List of standards referred to in this Directive

Original text. Later amendments are not shown.

  1. 1..

    CISPR 12 ‘Vehicles’, motorboats’ and spark-ignited engine-driven devices’ radio disturbance characteristics — Limits and methods of measurement’, 5th edition 2001

  2. 2..

    CISPR 16-1 ‘Specifications for radio disturbance and immunity measuring apparatus and methods — Part 1: Radio disturbance and immunity measuring apparatus’, 2nd edition 2002

  3. 3..

    CISPR 25 ‘Limits and methods of measurement of radio disturbance characteristics for the protection of receivers used on board vehicles’, 2nd edition 2002

  4. 4..

    ISO 7637-1 ‘Road vehicles — Electrical disturbance from conduction and coupling — Part 1: Definitions and general considerations’, 2nd edition 2002

  5. 5..

    ISO 7637-2 ‘Road vehicles — Electrical disturbance from conduction and coupling — Part 2: Electrical transient conduction along supply lines only on vehicles with nominal 12 V or 24 V supply voltage’, 2nd edition 2004

  6. 6..

    ISO-EN 17025 ‘General requirements for the competence of testing and calibration laboratories’, 1st edition 1999

  7. 7..

    ISO 11451 ‘Road vehicles — Electrical disturbances by narrowband radiated electromagnetic energy — Vehicle test methods’

    Part 1:General and definitions(ISO DIS 11451-1:2003)
    Part 2:Off-vehicle radiation source(FDIS 11451-2:2004)
    Part 4:Bulk current injection (BCI)(ISO 11451-4: 1st edition 1995)
  8. 8..

    ISO 11452 ‘Road vehicles — Electrical disturbances by narrowband radiated electromagnetic energy — Component test methods’

    Part 1:General and definitions(ISO DIS 11452-1:2003)
    Part 2:Absorber-lined chamber(ISO DIS 11452-2:2003)
    Part 3:Transverse electromagnetic mode (TEM) cell(ISO 11452-3: 3rd edition 2001)
    Part 4:Bulk current injection (BCI)(ISO DIS 11452-4:2003)
    Part 5:Strip line(ISO 11452-5: 2nd edition 2002)
  9. 9..

    ITU Radio Regulations, Edition 2001