# Commission Directive 2004/104/EC of 14 October 2004 adapting to technical progress Council Directive 72/245/EEC relating to the radio interference (electromagnetic compatibility) of vehicles and amending Directive 70/156/EEC on the approximation of the laws of the Member States relating to the type-approval of motor vehicles and their trailers (Text with EEA relevance), Division 4.5.2.4: Main wiring loom and sensor/actuator cables


The main wiring loom and any sensor/actuator cables shall rise vertically from the control unit to the top ground plate (this helps to maximise coupling with the electromagnetic field). Then they shall follow the underside of the plate to one of its free edges where they shall loop over and follow the top of the ground plate as far as the connections to the stripline feed. The cables shall then be routed to the associated equipment, which shall be sited in an area outside the influence of the electromagnetic field, e.g. on the floor of the screened room 1 m longitudinally away from the stripline.

---
Source: https://www.legislation.gov.uk/eudr/2004/104/attachment/20/division/division/4./division/4.5./division/4.5.2./division/4.5.2.4. (the official version)
Page: https://openlegislation.uk/eu-directive-2004-104/attachment-20/division/division-4./division-4.5./division-4.5.2./division-4.5.2.4.
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.