# Commission Directive 2004/104/EC of 14 October 2004 adapting to technical progress Council Directive 72/245/EEC relating to the radio interference (electromagnetic compatibility) of vehicles and amending Directive 70/156/EEC on the approximation of the laws of the Member States relating to the type-approval of motor vehicles and their trailers (Text with EEA relevance), Division 12.7


Table of installation and use of RF transmitters in the vehicle(s), if applicable (see Annex I, 3.1.8.):
frequency bands (Hz)
max. output power (W)
antenna position at vehicle,
specific conditions for installation and/or use
The applicant for type-approval must also supply, where appropriate:
Appendix 1
A list (with make(s) and type(s) of all electrical and/or electronic components concerned by this Directive (see paragraphs 2.1.9. and 2.1.10. of Annex I) and not previously listed.
Appendix 2
Schematics or drawing of the general arrangement of electrical and/or electronic components (concerned by this Directive) and the general wiring harness arrangement.
Appendix 3
Description of vehicle chosen to represent the type
Body style:
Left or right-hand drive:
Wheelbase:
Appendix 4
Relevant test report(s) supplied by the manufacturer from a test laboratory accredited to ISO 17025 and recognised by the Approval Authority for the purpose of drawing up the type-approval certificate.

---
Source: https://www.legislation.gov.uk/eudr/2004/104/attachment/9/division/division/12./division/12.7. (the official version)
Page: https://openlegislation.uk/eu-directive-2004-104/attachment-9/division/division-12./division-12.7.
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.