{
  "url": "https://openlegislation.uk/eu-directive-2004-73/annex-2I/division-C.23/division-1/division-1.8/division-1.8.3/division-1.8.3.1",
  "json_url": "https://openlegislation.uk/eu-directive-2004-73/annex-2I/division-C.23/division-1/division-1.8/division-1.8.3/division-1.8.3.1.json",
  "legislation": "eudr/2004/73",
  "legislation_title": "Commission Directive 2004/73/EC of 29 April 2004 adapting to technical progress for the twenty-ninth time Council Directive 67/548/EEC on the approximation of the laws, regulations and administrative provisions relating to the classification, packaging and labelling of dangerous substances (Text with EEA relevance)",
  "legislation_url": "https://openlegislation.uk/eu-directive-2004-73",
  "path": "annex/2I/division/C.23/division/1/division/1.8/division/1.8.3/division/1.8.3.1",
  "kind": "division",
  "number": "1.8.3.1",
  "heading": "Soil selection",
  "text": "To determine the transformation pathway, a representative soil can be used; a sandy loam or silty loam or loam or loamy sand [according to FAO and USDA classification (18)] with a pH of 5.5-8.0, an organic carbon content of 0.5-2.5% and a microbial biomass of at least 1% of total organic carbon is recommended (10).\nFor transformation rate studies at least three additional soils should be used representing a range of relevant soils. The soils should vary in their organic carbon content, pH, clay content and microbial biomass (10).\nAll soils should be characterised, at least, for texture (% sand, % silt, % clay) [according to FAO and USDA classification (18)], pH, cation exchange capacity, organic carbon, bulk density, water retention characteristic and microbial biomass (for aerobic studies only). Additional information on soil properties may be useful in interpreting the results. For determination of the soil characteristics the methods recommended in references (19)(20)(21)(22)(23) can be used. Microbial biomass should be determined by using the substrate-induced respiration (SIR) method (25)(26) or alternative methods (20).",
  "extent": "E+W+S+N.I.",
  "status": null,
  "version": "current",
  "annotations": [
    {
      "type": "footnote",
      "label": "f1",
      "text": "Water retention characteristic of a soil can be measured as field capacity, as water holding capacity or as water suction tension (pF). For explanations see Annex 1. It should be reported in the test report whether water retention characteristics and bulk density of soils were determined in undisturbed field samples or in disturbed (processed) samples."
    }
  ],
  "outstanding_effects": [],
  "provenance": {
    "source": "legislation.gov.uk",
    "source_url": "https://www.legislation.gov.uk/eudr/2004/73/annex/2I/division/C.23/division/1/division/1.8/division/1.8.3/division/1.8.3.1",
    "retrieved_at": "2026-11-01T15:22:47.605967+00:00"
  },
  "licence": "Open Government Licence v3.0",
  "licence_url": "https://www.nationalarchives.gov.uk/doc/open-government-licence/version/3/",
  "attribution": "Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives."
}