{
  "url": "https://openlegislation.uk/eu-directive-2004-73/annex-n5/division-B/division-1/division-1.4/division-1.4.2/division-1.4.2.3",
  "json_url": "https://openlegislation.uk/eu-directive-2004-73/annex-n5/division-B/division-1/division-1.4/division-1.4.2/division-1.4.2.3.json",
  "legislation": "eudr/2004/73",
  "legislation_title": "Commission Directive 2004/73/EC of 29 April 2004 adapting to technical progress for the twenty-ninth time Council Directive 67/548/EEC on the approximation of the laws, regulations and administrative provisions relating to the classification, packaging and labelling of dangerous substances (Text with EEA relevance)",
  "legislation_url": "https://openlegislation.uk/eu-directive-2004-73",
  "path": "annex/n5/division/B/division/1/division/1.4/division/1.4.2/division/1.4.2.3",
  "kind": "division",
  "number": "1.4.2.3",
  "heading": "Initial test (In vivo dermal irritation/corrosion test using one animal)",
  "text": "It is strongly recommended that the in vivo test be performed initially using one animal, especially when the substance is suspected to have corrosion potential. This is in accordance with the sequential testing strategy (see Annex 1).\nWhen a substance has been judged to be corrosive on the basis of a weight-of-the-evidence analysis, no further animal testing is needed. For most substances suspected of being corrosive, further in vivo testing is normally not necessary. However, in those cases where additional data are felt warranted because of insufficient evidence, limited animal testing may be carried out using the following approach: Up to three tests patches are applied sequentially to the animal. The first patch is removed after three minutes. If no serious skin reaction is observed, a second patch is applied and removed after one hour. If the observations at this stage indicate that exposure can humanely be allowed to extend to four hours, a third patch is applied and removed after four hours, and the response is graded.\nIf a corrosive effect is observed after any of the three sequential exposures, the test is immediately terminated. If a corrosive effect is not observed after the last patch is removed, the animal is observed for 14 days, unless corrosion develops at an earlier time point.\nIn those cases in which the test substance is not expected to produce corrosion but may be irritating, a single patch should be applied to one animal for four hours.",
  "extent": "E+W+S+N.I.",
  "status": null,
  "version": "current",
  "annotations": [],
  "outstanding_effects": [],
  "provenance": {
    "source": "legislation.gov.uk",
    "source_url": "https://www.legislation.gov.uk/eudr/2004/73/annex/n5/division/B/division/1/division/1.4/division/1.4.2/division/1.4.2.3",
    "retrieved_at": "2026-11-01T15:22:47.605967+00:00"
  },
  "licence": "Open Government Licence v3.0",
  "licence_url": "https://www.nationalarchives.gov.uk/doc/open-government-licence/version/3/",
  "attribution": "Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives."
}