Appendix ANNEX II INFORMATION DOCUMENT FOR EC VEHICLE TYPE-APPROVAL

The following information, if applicable, must be supplied in triplicate and include a list of contents. Any drawings must be supplied in appropriate scale and in sufficient detail on size A4 or on a folder of A4 format. Photographs, if any, must show sufficient detail.

1. 0..

   GENERAL

2. 0.1..

   Make (trade name of manufacturer):…

3. 0.2..

   Type:…

4. 0.2.0.1..

   Chassis:…

5. 0.2.1..

   Commercial name(s) (if available):…

6. 0.3..

   Means of identification of type, if marked on the vehicle (^b):…

7. 0.3.1..

   Location of that marking:…

8. 0.4..

   Category of vehicle (^c):…

9. 0.5..

   Name and address of manufacturer:…

10. 0.8..

    Address(es) of assembly plant(s):…

1. 1..

   GENERAL CONSTRUCTION CHARACTERISTICS OF THE VEHICLE

2. 1.1..

   Photographs and/or drawings of a representative vehicle:…

3. 1.2..

   Dimensional drawing of the whole vehicle:…

4. 1.3..

   Number of axles and wheels:…

5. 1.3.1..

   Number and position of axles with double wheels:…

6. 1.3.3..

   Powered axles (number, position, interconnection):…

7. 1.7..

   Driving cab (forward control or bonneted)(^z):…

1. 3..

   POWER PLANT (^q) (In the case of a vehicle that can run either on petrol, diesel, etc., or also in combination with another fuel, items shall be repeated (⁺))

2. 3.1..

   Manufacturer:…

3. 3.2..

   Internal combustion engine

4. 3.2.1..

   Specific engine information

5. 3.2.1.1..

   Working principle: positive ignition/compression ignition, four-stroke/two stroke^f1

6. 3.2.1.2..

   Number and arrangement of cylinders:…

7. 3.2.1.3..

   Engine capacity (^s):…cm³

8. 3.2.2..

   Fuel: diesel oil/petrol/LPG/NG/ethanol:

1. 4..

   TRANSMISSION (^v)

2. 4.2..

   Type (mechanical, hydraulic, electric, etc.):…

3. 4.5..

   Gearbox

4. 4.5.1..

   Type (manual/automatic/CVT (continuously variable transmission))

5. 4.9..

   Differential lock: yes/no/optional

1. 9..

   BODYWORK

2. 9.1..

   Type of bodywork:…

3. 9.3.1..

   Door configuration and number of doors:…

4. 9.10.3..

   Seats

5. 9.10.3.1..

   Number:…

1. 15..

   REUSABILITY, RECYCLABILITY and RECOVERABILITY

2. 15.1..

   Version to which the reference vehicle belongs:…

3. 15.2..

   Mass of the reference vehicle with bodywork or mass of the chassis with cab, without bodywork and/or coupling device if the manufacturer does not fit the bodywork and/or coupling device (including liquids, tools, spare wheel, if fitted) without driver:…

4. 15.3..

   Masses of materials of the reference vehicle

5. 15.3.1..

   Mass of material taken into account at the pre-treatment step (^##):…

6. 15.3.2..

   Mass of material taken into account at the dismantling step (^##):…

7. 15.3.3..

   Mass of material taken into account at the non-metallic residue treatment step, considered as recyclable (^##):

8. 15.3.4..

   Mass of material taken into account at the non-metallic residue treatment step, considered as energy recoverable (^##):…

9. 15.3.5..

   Materials breakdown (^##):…

10. 15.3.6..

    Total mass of materials, which are reusable and/or recyclable:…

11. 15.3.7..

    Total mass of materials, which are reusable and/or recoverable:…

12. 15.4..

    Rates

13. 15.4.1..

    Recyclability rate ‘R_cyc ( %)’:…

14. 15.4.2..

    Recoverability rate ‘R_cov ( %)’:…