# Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast) (Text with EEA relevance), Division 3.4.3: Roll-over and tip-over

Extent: E+W+S+N.I.

Where, in the case of self-propelled machinery with a ride-on driver, operator(s) or other person(s), there is a risk of rolling or tipping over, the machinery must be fitted with an appropriate protective structure, unless this increases the risk.
This structure must be such that in the event of rolling or tipping over it affords the ride-on person(s) an adequate deflection-limiting volume.
In order to verify that the structure complies with the requirement laid down in the second paragraph, the manufacturer or his authorised representative must, for each type of structure concerned, perform appropriate tests or have such tests performed.

---
Source: https://www.legislation.gov.uk/eudr/2006/42/annex/I/division/1/division/n7/division/3.4/division/3.4.3 (the official version)
Page: https://openlegislation.uk/eu-directive-2006-42/annex-I/division-1/division-n7/division-3.4/division-3.4.3
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.