# Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast) (Text with EEA relevance), Division 3.6.3.1: Vibrations

Extent: E+W+S+N.I.

The instructions must give the following information concerning vibrations transmitted by the machinery to the hand-arm system or to the whole body:
the vibration total value to which the hand-arm system is subjected, if it exceeds 2,5 m/s2. Where this value does not exceed 2,5 m/s2, this must be mentioned,
the highest root mean square value of weighted acceleration to which the whole body is subjected, if it exceeds 0,5 m/s2. Where this value does not exceed 0,5 m/s2, this must be mentioned,
the uncertainty of measurement.
These values must be either those actually measured for the machinery in question or those established on the basis of measurements taken for technically comparable machinery which is representative of the machinery to be produced.
Where harmonised standards are not applied, the vibration must be measured using the most appropriate measurement code for the machinery concerned.
The operating conditions during measurement and the measurement codes used must be described.

---
Source: https://www.legislation.gov.uk/eudr/2006/42/annex/I/division/1/division/n7/division/3.6/division/3.6.3/division/3.6.3.1 (the official version)
Page: https://openlegislation.uk/eu-directive-2006-42/annex-I/division-1/division-n7/division-3.6/division-3.6.3/division-3.6.3.1
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.

