# Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast) (Text with EEA relevance), Division 4.1.2.4: Pulleys, drums, wheels, ropes and chains

Extent: E+W+S+N.I.

Pulleys, drums and wheels must have a diameter commensurate with the size of the ropes or chains with which they can be fitted.
Drums and wheels must be designed, constructed and installed in such a way that the ropes or chains with which they are equipped can be wound without coming off.
Ropes used directly for lifting or supporting the load must not include any splicing other than at their ends. Splicings are, however, tolerated in installations which are intended by design to be modified regularly according to needs of use.
Complete ropes and their endings must have a working coefficient chosen in such a way as to guarantee an adequate level of safety. As a general rule, this coefficient is equal to 5.
Lifting chains must have a working coefficient chosen in such a way as to guarantee an adequate level of safety. As a general rule, this coefficient is equal to 4.
In order to verify that an adequate working coefficient has been attained, the manufacturer or his authorised representative must, for each type of chain and rope used directly for lifting the load and for the rope ends, perform the appropriate tests or have such tests performed.

---
Source: https://www.legislation.gov.uk/eudr/2006/42/annex/I/division/1/division/n8/division/4.1/division/4.1.2/division/4.1.2.4 (the official version)
Page: https://openlegislation.uk/eu-directive-2006-42/annex-I/division-1/division-n8/division-4.1/division-4.1.2/division-4.1.2.4
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.

