{
  "url": "https://openlegislation.uk/eu-directive-2006-42/annex-III",
  "json_url": "https://openlegislation.uk/eu-directive-2006-42/annex-III.json",
  "legislation": "eudr/2006/42",
  "legislation_title": "Directive 2006/42/EC of the European Parliament and of the Council of 17 May 2006 on machinery, and amending Directive 95/16/EC (recast) (Text with EEA relevance)",
  "legislation_url": "https://openlegislation.uk/eu-directive-2006-42",
  "path": "annex/III",
  "kind": "annex",
  "number": "III",
  "heading": "CE marking",
  "text": "The CE conformity marking shall consist of the initials ‘CE’ taking the following form:\nIf the CE marking is reduced or enlarged the proportions shown in the above drawing must be respected.\nThe various components of the CE marking must have substantially the same vertical dimension, which may not be less than 5 mm. The minimum dimension may be waived for small-scale machinery.\nThe CE marking must be affixed in the immediate vicinity of the name of the manufacturer or his authorised representative, using the same technique.\nWhere the full quality assurance procedure referred to in Article 12(3)(c) and 12(4)(b) has been applied, the CE marking must be followed by the identification number of the notified body.",
  "extent": "E+W+S+N.I.",
  "status": null,
  "version": "current",
  "annotations": [],
  "outstanding_effects": [],
  "provenance": {
    "source": "legislation.gov.uk",
    "source_url": "https://www.legislation.gov.uk/eudr/2006/42/annex/III",
    "retrieved_at": "2026-11-01T15:22:36.910149+00:00"
  },
  "licence": "Open Government Licence v3.0",
  "licence_url": "https://www.nationalarchives.gov.uk/doc/open-government-licence/version/3/",
  "attribution": "Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives."
}