{
  "url": "https://openlegislation.uk/eu-directive-2006-66/article-21",
  "json_url": "https://openlegislation.uk/eu-directive-2006-66/article-21.json",
  "legislation": "eudr/2006/66",
  "legislation_title": "Directive 2006/66/EC of the European Parliament and of the Council of 6 September 2006 on batteries and accumulators and waste batteries and accumulators and repealing Directive 91/157/EEC (Text with EEA relevance)",
  "legislation_url": "https://openlegislation.uk/eu-directive-2006-66",
  "path": "article/21",
  "kind": "article",
  "number": "21",
  "heading": "Labelling",
  "text": "1. Member States shall ensure that all batteries, accumulators and battery packs are appropriately marked with the symbol shown in Annex II.\n2. Member States shall ensure that the capacity of all portable and automotive batteries and accumulators is indicated on them in a visible, legible and indelible form by 26 September 2009 . The Commission shall be empowered to adopt delegated acts in accordance with Article 23a laying down detailed rules supplementing that requirement, including harmonised methods for the determination of capacity and appropriate use by 26 March 2009 .\n3. Batteries, accumulators and button cells containing more than 0,0005 % mercury, more than 0,002 % cadmium or more than 0,004 % lead, shall be marked with the chemical symbol for the metal concerned: Hg, Cd or Pb. The symbol indicating the heavy metal content shall be printed beneath the symbol shown in Annex II and shall cover an area of at least one-quarter the size of that symbol.\n4. The symbol shown in Annex II shall cover at least 3 % of the area of the largest side of the battery, accumulator or battery pack, up to a maximum size of 5 × 5 cm. In the case of cylindrical cells, the symbol shall cover at least 1,5 % of the surface area of the battery or accumulator and shall have a maximum size of 5 × 5 cm.\n5. Where the size of the battery, accumulator or battery pack is such that the symbol would be smaller than 0,5 × 0,5 cm, the battery, accumulator or battery pack need not be marked but a symbol measuring at least 1 × 1 cm shall be printed on the packaging.\n6. Symbols shall be printed visibly, legibly and indelibly.\n7. The Commission shall be empowered to adopt delegated acts in accordance with Article 23a in order to grant exemptions from the labelling requirements set out in this Article. As part of the preparation of such delegated acts, the Commission shall consult relevant stakeholders, in particular producers, collectors, recyclers, treatment operators, environmental and consumer organisations, and employee associations.",
  "extent": "E+W+S+N.I.",
  "status": null,
  "version": "current",
  "annotations": [
    {
      "type": "F",
      "label": "F1",
      "text": "Substituted by Directive 2013/56/EU of the European Parliament and of the Council of 20 November 2013 amending Directive 2006/66/EC of the European Parliament and of the Council on batteries and accumulators and waste batteries and accumulators as regards the placing on the market of portable batteries and accumulators containing cadmium intended for use in cordless power tools, and of button cells with low mercury content, and repealing Commission Decision 2009/603/EC (Text with EEA relevance)."
    }
  ],
  "outstanding_effects": [],
  "provenance": {
    "source": "legislation.gov.uk",
    "source_url": "https://www.legislation.gov.uk/eudr/2006/66/article/21",
    "retrieved_at": "2026-11-01T15:22:34.541612+00:00"
  },
  "licence": "Open Government Licence v3.0",
  "licence_url": "https://www.nationalarchives.gov.uk/doc/open-government-licence/version/3/",
  "attribution": "Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives."
}