{
  "url": "https://openlegislation.uk/eu-directive-2007-15/annex",
  "json_url": "https://openlegislation.uk/eu-directive-2007-15/annex.json",
  "legislation": "eudr/2007/15",
  "legislation_title": "Commission Directive 2007/15/EC of 14 March 2007 amending, for the purposes of its adaptation to technical progress, Annex I to Council Directive 74/483/EEC relating to the external projections of motor vehicles (Text with EEA relevance)",
  "legislation_url": "https://openlegislation.uk/eu-directive-2007-15",
  "path": "annex",
  "kind": "annex",
  "number": null,
  "heading": null,
  "text": "Point 6.5.2. of Annex I to Directive 74/483/EEC is replaced by the following:\n‘6.5.2.\nIf the line of the bumper, front or rear, corresponding to the outline contour of the vehicle, from a vertical projection, is on a rigid surface, that surface shall have a minimum radius of curvature of 5 mm for all points lying between the contour line and lines, above and below the contour line, which are the traces of points 20 mm inside, and measured normal to, the contour line at any point. A minimum surface radius of curvature of 2,5 mm shall apply to all other areas of the bumpers.\nThis provision applies to that part of the bumper lying between tangential points of contact of the contour line with two vertical planes each set at an angle of 15 degrees with the vertical longitudinal plane of symmetry of the vehicle (see Figure 1).\n’",
  "extent": "E+W+S+N.I.",
  "status": null,
  "version": "current",
  "annotations": [],
  "outstanding_effects": [],
  "provenance": {
    "source": "legislation.gov.uk",
    "source_url": "https://www.legislation.gov.uk/eudr/2007/15/annex",
    "retrieved_at": "2026-11-01T15:22:28.273834+00:00"
  },
  "licence": "Open Government Licence v3.0",
  "licence_url": "https://www.nationalarchives.gov.uk/doc/open-government-licence/version/3/",
  "attribution": "Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives."
}