Annex V X1

Annex V to Directive 2002/72/EC is amended as follows:

1. (1)

   Part A is replaced by the following:

   ‘ Part A:

   General specifications

   Plastic material and articles shall not release primary aromatic amines in a detectable quantity (DL = 0,01 mg/kg of food or food simulant). The migration of the primary aromatic amines appearing in the lists in Annex II and III is excluded from this restriction. ’

2. (2)

   In Part B, the following new specifications are inserted, in the appropriate numerical order:

   OJ L 339, 30.12.1996, p. 1 . ’
   Ref. No	OTHER SPECIFICATIONS
   ‘ 42080	Carbon black Specifications: Toluene extractables: maximum 0,1 %, determined according to ISO method 6209. UV absorption of cyclohexane extract at 386 nm: < 0,02 AU for a 1 cm cell or < 0,1 AU for a 5 cm cell, determined according to a generally recognised method of analysis. Benzo(a)pyrene content: max 0,25 mg/kg carbon black. Maximum use level of carbon black in the polymer: 2,5 % w/w
   72081/10	Petroleum hydrocarbon resins (hydrogenated) Specifications: Petroleum hydrocarbon resins, hydrogenated are produced by the catalytic or thermal polymerisation of dienes and olefins of the aliphatic, alicyclic and/or monobenzenoid arylalkene types from distillates of cracked petroleum stocks with a boiling range not greater than 220 °C, as well as the pure monomers found in these distillation streams, subsequently followed by distillation, hydrogenation and additional processing. Properties: Viscosity: > 3 Pa.s at 120 °C. Softening point: > 95 °C as determined by ASTM Method E 28-67. Bromine number: < 40 (ASTM D1159) The colour of a 50 % solution in toluene < 11 on the Gardner scale Residual aromatic monomer ≤ 50 ppm
   76845	Polyester of 1,4-butanediol with caprolactone MW fraction < 1 000 is less than 0,5 % (w/w)
   81500	Polyvinylpyrrolidone The substance shall meet the purity criteria established in Commission Directive 96/77/EC f1
   88640	Soybean oil, epoxidized Oxirane < 8 %, iodine number < 6