Division 4 In Appendix 1 of Annex VI, the following points are added:

‘1.5.

Crankcase emissions test results: …

1.6.

Carbon monoxide emissions test results

Lambda formula: Appendix 1 to Annex IV
Test	CO value(% vol)	Lambdaf1	Engine speed(min-1)	Engine oil temperature(°C)
Low idle test		N/A
High idle test

1.7.

Smoke opacity test results

1.7.1.

At steady speeds:

Engine speed (min-1)	Nominal flow G(litres/second)	Limit absorption values(m-1)	Measured absorption values (m-1)
1. …	…	…	…
2. …	…	…	…
3. …	…	…	…
4. …	…	…	…
5. …	…	…	…
6. …	…	…	…

1.7.2.

Free acceleration tests

1.7.2.1.

Engine test in accordance with Section 4.3 of Annex VI to Directive 2005/78/EC

Percentage of maximum rpm	Percentage of maximum torque at rpm stated m-1	Measured absorption value m-1	Corrected absorption value m-1

1.7.2.2.

Under free acceleration

1.7.2.2.1.

Measured value of the absorption coefficient: … m^-1

1.7.2.2.2.

Corrected value of the absorption coefficient: … m^-1

1.7.2.2.3.

Location of the absorption coefficient symbol on the vehicle: …

1.7.2.3.

Vehicle test according to section 3 of Annex VI to Directive 2005/78/EC

1.7.2.3.1.

Corrected absorption value: … m^-1

1.7.2.3.2.

Rpm at start: … rpm

1.7.3.

Stated net maximum power … kW at … rpm

1.7.4.

Make and type of opacimeter: …

1.7.5.

Principal characteristics of engine type

1.7.5.1.

Engine working principle: four-stroke/two-stroke^f2

1.7.5.2.

Number and layout of cylinders: …

1.7.5.3.

Cylinder capacity: … cm³

1.7.5.4.

Fuel feed: direct injection/indirect injection

1.7.5.5.

Supercharging equipment YES/NO ’