# Commission Directive 2009/1/EC of 7 January 2009 amending, for the purposes of its adaptation to technical progress, Directive 2005/64/EC of the European Parliament and of the Council on the type-approval of motor vehicles with regard to their reusability, recyclability and recoverability (Text with EEA relevance), Article 1

Extent: E+W+S+N.I.

Annex IV to Directive 2005/64/EC is amended by inserting a new paragraph 4 as follows:
‘4.1.
For the purposes of preliminary assessment under Article 6 of Directive 2005/64/EC, the vehicle manufacturer shall be required to demonstrate that, through contractual arrangements with his suppliers, compliance with Article 4(2)(a) of Directive 2000/53/EC is ensured.
4.2.
For the purposes of preliminary assessment under Article 6 of Directive 2005/64/EC, the vehicle manufacturer shall be required to establish procedures for the following purposes:
(a) to communicate the applicable requirements to his staff and to all of his suppliers;
(b) to monitor and ensure that suppliers act in accordance with those requirements;
(c) to collect the relevant data through the full supply chain;
(d) to check and verify the information received from suppliers;
(e) to react adequately where the data received from the suppliers indicate non-compliance with the requirements under Article 4(2)(a) of Directive 2000/53/EC.
4.3.
For the purposes of paragraph 4.1 and 4.2, the vehicle manufacturer shall be required to use, in agreement with the competent body, ISO 9000/14000 or other standardised quality assurance programme.’

---
Source: https://www.legislation.gov.uk/eudr/2009/1/article/1 (the official version)
Page: https://openlegislation.uk/eu-directive-2009-1/article-1
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.