# Directive 2009/45/EC of the European Parliament and of the Council of 6 May 2009 on safety rules and standards for passenger ships (Recast) (Text with EEA relevance), Division .5

Extent: E+W+S+N.I.

Where a double bottom is required to be fitted its depth shall comply with the standards of a recognised organisation and the inner bottom shall be continued out to the ship’s sides in such a manner as to protect the bottom to the turn of the bilge. Such protection will be deemed satisfactory if the line of intersection of the outer edge of the margin plate with the bilge plating is not lower at any part than a horizontal plane passing through the point of intersection with the frame line amidships of a transverse diagonal line inclined at 25 ° to the base line and cutting it at a point one half of the ship’s moulded breadth from the middle line.

---
Source: https://www.legislation.gov.uk/eudr/2009/45/annex/I/chapter/2/part/B/part/2/division/10/division/1/division/.5 (the official version)
Page: https://openlegislation.uk/eu-directive-2009-45/annex-I/chapter-2/part-B/part-2/division-10/division-1/division-.5
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.

