Annex II

Annex V Part 1 is amended as follows:

1. 1..

   The third paragraph of the remark on page 1 is replaced by the following:

   ‘The owner of the craft, or his representative, shall bring to the notice of the competent authority any change in the name or ownership of the craft, any re-measurement, and any change in the registration number or home port, and shall send the Community certificate to that authority for amendment.’

2. 2..

   In box 12 of the model the introductory phrase is replaced by the following:

   ‘The certificate number (1), unique European vessel identification number (2), registration number (3) and measurement number (4) are affixed with the corresponding signs at the following locations on the craft’

3. 3..

   In box 15 of the model item 2 is replaced by the following:

   ‘2.

   Couplings:

   Type of coupling: …

   Number of coupling cables: …

   Tensile strength per longitudinal coupling: … kN

   Number of couplings per side: …

   Length of each coupling cable: … m

   Tensile strength per cable: … kN

   Number of cable windings:’

4. 4..

   Box 19 of the model is replaced by the following:

   (..) (..) (..) (..)

   (..) (..)

   19. Draught overall ‘m 19b Draught T m’

   (..)

5. 5..

   Box 35 of the model is replaced by the following:

   ‘35.

   Bilge and drainage system

   Number of bilge pumps …,

   of which power driven …

   Minimum pumping capacity

   first bilge pump … l/min

   second bilge pump … l/min’

6. 6..

   Box 42 of the model is replaced by the following:

   ‘42.

   Other equipment

   heaving line gangway in accordance w. Article 10(2)(d) (*) in accordance w. Article 15.06(12) (*) Length … m	Voice communication system	alternative two-way (*) simultaneous two-way/telephone (*) internal radio-telephone link (*)
   gaff hook first-aid kit pair of binoculars notice concerning rescue of persons overboard	Radio-telephone installation	vessel-to-vessel service nautical information service vessel-port authority service
   fire-resistant receptacles	Cranes	in accordance with Article 11.12(9) (*) other cranes with a useful load not exceeding 2 000 kg (*)
   embarkation stairway/ladder (*)

   ’

7. 7..

   Box 43 of the model is replaced by the following:

   ‘43.

   Firefighting appliances

   Number portable fire extinguishers …, fire pumps …, hydrants …

   Permanently installed firefighting systems in accommodation etc.

   No/Number … (*)

   Permanently installed firefighting systems in engine rooms etc.

   No/Number … (*)

   The power-driven bilge pump replaces a fire pump … Yes/No (*)’

8. 8..

   Box 44 of the model is replaced by the following:

   ‘44.

   Life saving appliances

   Number of lifebuoys …, of which with light …, with line … (*)

   One lifejacket for every person who is regularly on board/in accordance with EN 395:1998, EN 396:1998, EN ISO 12402-3:2006 or EN ISO 12402-4:2006 (*)

   A ship’s boat with a set of oars, one mooring line and a baler/in accordance with EN 1914:1997 (*)

   Platform or an installation in accordance with Article 15.15(5) or (6) (*)

   Number, type and site(s) of installation of the equipment to enable persons to be transferred safely to shallow water, to the bank or to another craft in accordance with Article 15.09(3) …

   …

   …

   Number of individual life saving appliances for shipboard personnel …,

   of which in accordance with Article 10.05(2) … (*)

   Number of individual life saving appliances for passengers … (*)

   Collective life saving appliances, with respect to the number, equivalent to … individual life saving appliances (*)

   Two breathing apparatus sets, two sets in accordance with Article 15.12(10)(b), number of … smoke hoods (*)

   Safety rota and safety plan displayed at: …

   …

   …’

9. 9..

   In box 52 of the model, the last row is replaced by the following:

   ‘Continued on page (*)

   End of Community certificate (*)’