OpenLegislation

Annex II

United Kingdom

Original text. Later amendments are not shown.

Annex II to Directive 97/68/EC is amended as follows:

  1. 1..

    Section 2 of Appendix 1 is replaced by the following:

    ‘2.

    MEASURES TAKEN AGAINST AIR POLLUTION

    2.1.

    Device for recycling crankcase gases: yes/nof1 …

    2.2.

    Additional anti-pollution devices (if any, and if not covered by another heading)

    2.2.1.

    Catalytic converter: yes/no

    2.2.1.1.

    Make(s): …

    2.2.1.2.

    Type(s): …

    2.2.1.3.

    Number of catalytic converters and elements …

    2.2.1.4.

    Dimensions- and volume of the catalytic converter(s): …

    2.2.1.5.

    Type of catalytic action: …

    2.2.1.6.

    Total charge of precious metals: …

    2.2.1.7.

    Relative concentration: …

    2.2.1.8.

    Substrate (structure and material): …

    2.2.1.9.

    Cell density: …

    2.2.1.10.

    Type of casing for the catalytic converter(s): …

    2.2.1.11.

    Location of the catalytic converter(s) (place(s) and maximum/minimum distance(s) from engine): …

    2.2.1.12.

    Normal operating range (K): …

    2.2.1.13.

    Consumable reagent (where appropriate): …

    2.2.1.13.1.

    Type and concentration of reagent needed for catalytic action: …

    2.2.1.13.2.

    Normal operational temperature range of reagent: …

    2.2.1.13.3.

    International standard (where appropriate): …

    2.2.1.14.

    NOx sensor: yes/no

    2.2.2.

    Oxygen sensor: yes/no

    2.2.2.1.

    Make(s): …

    2.2.2.2.

    Type: …

    2.2.2.3.

    Location: …

    2.2.3.

    Air injection: yes/no

    2.2.3.1.

    Type (pulse air, air pump, etc.): …

    2.2.4.

    EGR: yes/no

    2.2.4.1.

    Characteristics (cooled/uncooled, high pressure/low pressure, etc.): …

    2.2.5.

    Particulate trap: yes/no

    2.2.5.1.

    Dimensions and capacity of the particulate trap: …

    2.2.5.2.

    Type and design of the particulate trap: …

    2.2.5.3.

    Location (place(s) and maximum/minimum distance(s) from engine): …

    2.2.5.4.

    Method or system of regeneration, description and/or drawing: …

    2.2.5.5.

    Normal operating temperature (K) and pressure (kPa) range: …

    2.2.6.

    Other systems: yes/no

    2.2.6.1.

    Description and operation: …’

  2. 2..

    Section 2 of Appendix 3 is replaced by the following:

    ‘2.

    MEASURES TAKEN AGAINST AIR POLLUTION

    2.1.

    Device for recycling crankcase gases: yes/nof2 …

    2.2.

    Additional anti-pollution devices (if any, and if not covered by another heading)

    2.2.1.

    Catalytic converter: yes/no

    2.2.1.1.

    Make(s): …

    2.2.1.2.

    Type(s): …

    2.2.1.3.

    Number of catalytic converters and elements …

    2.2.1.4.

    Dimensions- and volume of the catalytic converter(s): …

    2.2.1.5.

    Type of catalytic action: …

    2.2.1.6.

    Total charge of precious metals: …

    2.2.1.7.

    Relative concentration: …

    2.2.1.8.

    Substrate (structure and material): …

    2.2.1.9.

    Cell density: …

    2.2.1.10.

    Type of casing for the catalytic converter(s): …

    2.2.1.11.

    Location of the catalytic converter(s) (place(s) and maximum/minimum distance(s) from engine): …

    2.2.1.12.

    Normal operating range (K) …

    2.2.1.13.

    Consumable reagent (where appropriate): …

    2.2.1.13.1.

    Type and concentration of reagent needed for catalytic action: …

    2.2.1.13.2.

    Normal operational temperature range of reagent: …

    2.2.1.13.3.

    International standard (where appropriate): …

    2.2.1.14.

    NOx sensor: yes/no

    2.2.2.

    Oxygen sensor: yes/no

    2.2.2.1.

    Make(s): …

    2.2.2.2.

    Type: …

    2.2.2.3.

    Location: …

    2.2.3.

    Air injection: yes/no

    2.2.3.1.

    Type (pulse air, air pump, etc.): …

    2.2.4.

    EGR: yes/no

    2.2.4.1.

    Characteristics (cooled/uncooled, high pressure/low pressure, etc.): …

    2.2.5.

    Particulate trap: yes/no

    2.2.5.1.

    Dimensions and capacity of the particulate trap: …

    2.2.5.2.

    Type and design of the particulate trap: …

    2.2.5.3.

    Location (place(s) and maximum/minimum distance(s) from engine): …

    2.2.5.4.

    Method or system of regeneration, description and/or drawing: …

    2.2.5.5.

    Normal operating temperature (K) and pressure (kPa) range: …

    2.2.6.

    Other systems: yes/no

    2.2.6.1.

    Description and operation: …’

Annotations

Footnotes

f1

Strike out what does not apply.’

f2

Strike out what does not apply.’