{
  "url": "https://openlegislation.uk/eu-directive-2011-65/annex-III",
  "json_url": "https://openlegislation.uk/eu-directive-2011-65/annex-III.json",
  "legislation": "eudr/2011/65",
  "legislation_title": "Directive 2011/65/EU of the European Parliament and of the Council of 8 June 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (recast) (Text with EEA relevance)",
  "legislation_url": "https://openlegislation.uk/eu-directive-2011-65",
  "path": "annex/III",
  "kind": "annex",
  "number": "III",
  "heading": null,
  "text": "Applications exempted from the restriction in Article 4(1)\nOJ L 326, 29.12.1969, p. 36.\nDirective 97/68/EC of the European Parliament and of the Council of 16 December 1997 on the approximation of the laws of the Member States relating to measures against the emission of gaseous and particulate pollutants from internal combustion engines to be installed in non-road mobile machinery ( OJ L 59, 27.2.1998, p. 1 ).\nCouncil Directive 69/493/EEC of 15 December 1969 on the approximation of the laws of the Member States relating to crystal glass ( OJ L 326, 29.12.1969, p. 36 ).\nRegulation (EU) 2016/1628 of the European Parliament and of the Council of 14 September 2016 on requirements relating to gaseous and particulate pollutant emission limits and type-approval for internal combustion engines for non-road mobile machinery, amending Regulations (EU) No 1024/2012 and (EU) No 167/2013, and amending and repealing Directive 97/68/EC ( OJ L 252, 16.9.2016, p. 53 ).\nExemption\nScope and dates of applicability\n1\nMercury in single capped (compact) fluorescent lamps not exceeding (per burner):\n1(a)\nFor general lighting purposes < 30 W: 5 mg\nExpires on 31 December 2011; 3,5 mg may be used per burner after 31 December 2011 until 31 December 2012; 2,5 mg shall be used per burner after 31 December 2012\n1(b)\nFor general lighting purposes ≥ 30 W and < 50 W: 5 mg\nExpires on 31 December 2011; 3,5 mg may be used per burner after 31 December 2011\n1(c)\nFor general lighting purposes ≥ 50 W and < 150 W: 5 mg\n1(d)\nFor general lighting purposes ≥ 150 W: 15 mg\n1(e)\nFor general lighting purposes with circular or square structural shape and tube diameter ≤ 17 mm\nNo limitation of use until 31 December 2011; 7 mg may be used per burner after 31 December 2011\n1(f)\nFor special purposes: 5 mg\n1(g)\nFor general lighting purposes < 30 W with a lifetime equal or above 20 000 h: 3,5 mg\nExpires on 31 December 2017\n2(a)\nMercury in double-capped linear fluorescent lamps for general lighting purposes not exceeding (per lamp):\n2(a)(1)\nTri-band phosphor with normal lifetime and a tube diameter < 9 mm (e.g. T2): 5 mg\nExpires on 31 December 2011; 4 mg may be used per lamp after 31 December 2011\n2(a)(2)\nTri-band phosphor with normal lifetime and a tube diameter ≥ 9 mm and ≤ 17 mm (e.g. T5): 5 mg\nExpires on 31 December 2011; 3 mg may be used per lamp after 31 December 2011\n2(a)(3)\nTri-band phosphor with normal lifetime and a tube diameter > 17 mm and ≤ 28 mm (e.g. T8): 5 mg\nExpires on 31 December 2011; 3,5 mg may be used per lamp after 31 December 2011\n2(a)(4)\nTri-band phosphor with normal lifetime and a tube diameter > 28 mm (e.g. T12): 5 mg\nExpires on 31 December 2012; 3,5 mg may be used per lamp after 31 December 2012\n2(a)(5)\nTri-band phosphor with long lifetime (≥ 25 000 h): 8 mg\nExpires on 31 December 2011; 5 mg may be used per lamp after 31 December 2011\n2(b)\nMercury in other fluorescent lamps not exceeding (per lamp):\n2(b)(1)\nLinear halophosphate lamps with tube > 28 mm (e.g. T10 and T12): 10 mg\nExpires on 13 April 2012\n2(b)(2)\nNon-linear halophosphate lamps (all diameters): 15 mg\nExpires on 13 April 2016\n2(b)(3)\nNon-linear tri-band phosphor lamps with tube diameter > 17 mm (e.g. T9)\nNo limitation of use until 31 December 2011; 15 mg may be used per lamp after 31 December 2011\n2(b)(4)\nLamps for other general lighting and special purposes (e.g. induction lamps)\nNo limitation of use until 31 December 2011; 15 mg may be used per lamp after 31 December 2011\n3\nMercury in cold cathode fluorescent lamps and external electrode fluorescent lamps (CCFL and EEFL) for special purposes not exceeding (per lamp):\n3(a)\nShort length (≤ 500 mm)\nNo limitation of use until 31 December 2011; 3,5 mg may be used per lamp after 31 December 2011\n3(b)\nMedium length (> 500 mm and ≤ 1 500 mm)\nNo limitation of use until 31 December 2011; 5 mg may be used per lamp after 31 December 2011\n3(c)\nLong length (> 1 500 mm)\nNo limitation of use until 31 December 2011; 13 mg may be used per lamp after 31 December 2011\n4(a)\nMercury in other low pressure discharge lamps (per lamp)\nNo limitation of use until 31 December 2011; 15 mg may be used per lamp after 31 December 2011\n4(b)\nMercury in High Pressure Sodium (vapour) lamps for general lighting purposes not exceeding (per burner) in lamps with improved colour rendering index Ra > 60:\n4(b)-I\nP ≤ 155 W\nNo limitation of use until 31 December 2011; 30 mg may be used per burner after 31 December 2011\n4(b)-II\n155 W < P ≤ 405 W\nNo limitation of use until 31 December 2011; 40 mg may be used per burner after 31 December 2011\n4(b)-III\nP > 405 W\nNo limitation of use until 31 December 2011; 40 mg may be used per burner after 31 December 2011\n4(c)\nMercury in other High Pressure Sodium (vapour) lamps for general lighting purposes not exceeding (per burner):\n4(c)-I\nP ≤ 155 W\nNo limitation of use until 31 December 2011; 25 mg may be used per burner after 31 December 2011\n4(c)-II\n155 W < P ≤ 405 W\nNo limitation of use until 31 December 2011; 30 mg may be used per burner after 31 December 2011\n4(c)-III\nP > 405 W\nNo limitation of use until 31 December 2011; 40 mg may be used per burner after 31 December 2011\n4(d)\nMercury in High Pressure Mercury (vapour) lamps (HPMV)\nExpires on 13 April 2015\n4(e)\nMercury in metal halide lamps (MH)\n4(f)\nMercury in other discharge lamps for special purposes not specifically mentioned in this Annex\n4(g)\nMercury in hand crafted luminous discharge tubes used for signs, decorative or architectural and specialist lighting and light-artwork, where the mercury content shall be limited as follows:\n(a) 20 mg per electrode pair + 0,3 mg per tube length in cm, but not more than 80 mg, for outdoor applications and indoor applications exposed to temperatures below 20 °C;\n(b) 15 mg per electrode pair + 0,24 mg per tube length in cm, but not more than 80 mg, for all other indoor applications.\nExpires on 31 December 2018\n5(a)\nLead in glass of cathode ray tubes\n5(b)\nLead in glass of fluorescent tubes not exceeding 0,2 % by weight\n6(a)\nLead as an alloying element in steel for machining purposes and in galvanised steel containing up to 0,35 % lead by weight\nExpires on:\n21 July 2021 for categories 8 and 9 other than in vitro diagnostic medical devices and industrial monitoring and control instruments;\n21 July 2023 for category 8 in vitro diagnostic medical devices;\n21 July 2024 for category 9 industrial monitoring and control instruments, and for category 11.\n6(a)-I\nLead as an alloying element in steel for machining purposes containing up to 0,35 % lead by weight and in batch hot dip galvanised steel components containing up to 0,2 % lead by weight\nExpires on 21 July 2021 for categories 1-7 and 10.\n6(b)\nLead as an alloying element in aluminium containing up to 0,4 % lead by weight\nExpires on:\n21 July 2021 for categories 8 and 9 other than in vitro diagnostic medical devices and industrial monitoring and control instruments,\n21 July 2023 for category 8 in vitro diagnostic medical devices,\n21 July 2024 for category 9 industrial monitoring and control instruments, and for category 11.\n6(b)-I\nLead as an alloying element in aluminium containing up to 0,4 % lead by weight, provided it stems from lead-bearing aluminium scrap recycling\nExpires on 21 July 2021 for categories 1-7 and 10.\n6(b)-II\nLead as an alloying element in aluminium for machining purposes with a lead content up to 0,4 % by weight\nExpires on 18 May 2021 for categories 1-7 and 10.\n6(c)\nCopper alloy containing up to 4 % lead by weight\nExpires on:\n21 July 2021 for categories 1-7 and 10,\n21 July 2021 for categories 8 and 9 other than in vitro diagnostic medical devices and industrial monitoring and control instruments,\n21 July 2023 for category 8 in vitro diagnostic medical devices,\n21 July 2024 for category 9 industrial monitoring and control instruments, and for category 11.\n7(a)\nLead in high melting temperature type solders (i.e. lead-based alloys containing 85 % by weight or more lead)\nApplies to categories 1-7 and 10 (except applications covered by point 24 of this Annex) and expires on 21 July 2021 .\nFor categories 8 and 9 other than in vitro diagnostic medical devices and industrial monitoring and control instruments expires on 21 July 2021 .\nFor category 8 in vitro diagnostic medical devices expires on 21 July 2023 .\nFor category 9 industrial monitoring and control instruments, and for category 11 expires on 21 July 2024 .\n7(b)\nLead in solders for servers, storage and storage array systems, network infrastructure equipment for switching, signalling, transmission, and network management for telecommunications\n7(c)-I\nElectrical and electronic components containing lead in a glass or ceramic other than dielectric ceramic in capacitors, e.g. piezoelectronic devices, or in a glass or ceramic matrix compound\nApplies to categories 1-7 and 10 (except applications covered under point 34) and expires on 21 July 2021 .\nFor categories 8 and 9 other than in vitro diagnostic medical devices and industrial monitoring and control instruments expires on 21 July 2021 .\nFor category 8 in vitro diagnostic medical devices expires on 21 July 2023 .\nFor category 9 industrial monitoring and control instruments, and for category 11 expires on 21 July 2024 .\n7(c)-II\nLead in dielectric ceramic in capacitors for a rated voltage of 125 V AC or 250 V DC or higher\nDoes not apply to applications covered by point 7(c)-I and 7(c)-IV of this Annex.\nExpires on:\n21 July 2021 for categories 1-7 and 10;\n21 July 2021 for categories 8 and 9 other than in vitro diagnostic medical devices and industrial monitoring and control instruments;\n21 July 2023 for category 8 in vitro diagnostic medical devices;\n21 July 2024 for category 9 industrial monitoring and control instruments, and for category 11.\n7(c)-III\nLead in dielectric ceramic in capacitors for a rated voltage of less than 125 V AC or 250 V DC\nExpires on 1 January 2013 and after that date may be used in spare parts for EEE placed on the market before 1 January 2013\n7(c)-IV\nLead in PZT based dielectric ceramic materials for capacitors which are part of integrated circuits or discrete semiconductors\nExpires on:\n21 July 2021 for categories 1-7 and 10;\n21 July 2021 for categories 8 and 9 other than in vitro diagnostic medical devices and industrial monitoring and control instruments;\n21 July 2023 for category 8 in vitro diagnostic medical devices;\n21 July 2024 for category 9 industrial monitoring and control instruments, and for category 11.\n8(a)\nCadmium and its compounds in one shot pellet type thermal cut-offs\nExpires on 1 January 2012 and after that date may be used in spare parts for EEE placed on the market before 1 January 2012\n8(b)\nCadmium and its compounds in electrical contacts\nApplies to categories 8, 9 and 11 and expires on:\n21 July 2021 for categories 8 and 9 other than in vitro diagnostic medical devices and industrial monitoring and control instruments;\n21 July 2023 for category 8 in vitro diagnostic medical devices;\n21 July 2024 for category 9 industrial monitoring and control instruments, and for category 11.\n8(b)-I\nCadmium and its compounds in electrical contacts used in:\ncircuit breakers,\nthermal sensing controls,\nthermal motor protectors (excluding hermetic thermal motor protectors),\nAC switches rated at:\n6 A and more at 250 V AC and more, or\n12 A and more at 125 V AC and more,\nDC switches rated at 20 A and more at 18 V DC and more, and\nswitches for use at voltage supply frequency ≥ 200 Hz.\nApplies to categories 1 to 7 and 10 and expires on 21 July 2021 .\n9\nHexavalent chromium as an anticorrosion agent of the carbon steel cooling system in absorption refrigerators up to 0,75 % by weight in the cooling solution\n9(b)\nLead in bearing shells and bushes for refrigerant-containing compressors for heating, ventilation, air conditioning and refrigeration (HVACR) applications\nApplies to categories 8, 9 and 11; expires on:\n21 July 2023 for category 8 in vitro diagnostic medical devices,\n21 July 2024 for category 9 industrial monitoring and control instruments and for category 11,\n21 July 2021 for other subcategories of categories 8 and 9.\n9(b)-(I)\nLead in bearing shells and bushes for refrigerant-containing hermetic scroll compressors with a stated electrical power input equal or below 9 kW for heating, ventilation, air conditioning and refrigeration (HVACR) applications\nApplies to category 1; expires on 21 July 2019 .\n11(a)\nLead used in C-press compliant pin connector systems\nMay be used in spare parts for EEE placed on the market before 24 September 2010\n11(b)\nLead used in other than C-press compliant pin connector systems\nExpires on 1 January 2013 and after that date may be used in spare parts for EEE placed on the market before 1 January 2013\n12\nLead as a coating material for the thermal conduction module C-ring\nMay be used in spare parts for EEE placed on the market before 24 September 2010\n13(a)\nLead in white glasses used for optical applications\nApplies to all categories; expires on:\n21 July 2023 for category 8 in vitro diagnostic medical devices;\n21 July 2024 for category 9 industrial monitoring and control instruments and for category 11;\n21 July 2021 for all other categories and subcategories\n13(b)\nCadmium and lead in filter glasses and glasses used for reflectance standards\nApplies to categories 8, 9 and 11; expires on:\n21 July 2023 for category 8 in vitro diagnostic medical devices;\n21 July 2024 for category 9 industrial monitoring and control instruments and for category 11;\n21 July 2021 for other subcategories of categories 8 and 9\n13(b)-(I)\nLead in ion coloured optical filter glass types\nApplies to categories 1 to 7 and 10; expires on 21 July 2021 for categories 1 to 7 and 10\n13(b)-(II)\nCadmium in striking optical filter glass types; excluding applications falling under point 39 of this Annex\n13(b)-(III)\nCadmium and lead in glazes used for reflectance standards\n14\nLead in solders consisting of more than two elements for the connection between the pins and the package of microprocessors with a lead content of more than 80 % and less than 85 % by weight\nExpired on 1 January 2011 and after that date may be used in spare parts for EEE placed on the market before 1 January 2011\n15\nLead in solders to complete a viable electrical connection between semiconductor die and carrier within integrated circuit flip chip packages\nApplies to categories 8, 9 and 11 and expires on:\n21 July 2021 for categories 8 and 9 other than in vitro diagnostic medical devices and industrial monitoring and control instruments;\n21 July 2023 for category 8 in vitro diagnostic medical devices;\n21 July 2024 for category 9 industrial monitoring and control instruments, and for category 11.\n15(a)\nLead in solders to complete a viable electrical connection between the semiconductor die and carrier within integrated circuit flip chip packages where at least one of the following criteria applies:\na semiconductor technology node of 90 nm or larger;\na single die of 300 mm 2 or larger in any semiconductor technology node;\nstacked die packages with die of 300 mm 2 or larger, or silicon interposers of 300 mm 2 or larger.\nApplies to categories 1 to 7 and 10 and expires on 21 July 2021 .\n16\nLead in linear incandescent lamps with silicate coated tubes\nExpires on 1 September 2013\n17\nLead halide as radiant agent in high intensity discharge (HID) lamps used for professional reprography applications\n18(a)\nLead as activator in the fluorescent powder (1 % lead by weight or less) of discharge lamps when used as speciality lamps for diazoprinting reprography, lithography, insect traps, photochemical and curing processes containing phosphors such as SMS ((Sr,Ba)2MgSi2O7:Pb)\nExpired on 1 January 2011\n18(b)\nLead as activator in the fluorescent powder (1 % lead by weight or less) of discharge lamps when used as sun tanning lamps containing phosphors such as BSP (BaSi2O5:Pb)\nExpires on:\n21 July 2021 for categories 1-7 and 10;\n21 July 2021 for categories 8 and 9 other than in vitro diagnostic medical devices and industrial monitoring and control instruments;\n21 July 2023 for category 8 in vitro diagnostic medical devices;\n21 July 2024 for category 9 industrial monitoring and control instruments, and for category 11.\n18(b)-I\nLead as activator in the fluorescent powder (1 % lead by weight or less) of discharge lamps containing phosphors such as BSP (BaSi2O5:Pb) when used in medical phototherapy equipment\nApplies to categories 5 and 8, excluding applications covered by entry 34 of Annex IV, and expires on 21 July 2021 .\n19\nLead with PbBiSn-Hg and PbInSn-Hg in specific compositions as main amalgam and with PbSn-Hg as auxiliary amalgam in very compact energy saving lamps (ESL)\nExpires on 1 June 2011\n20\nLead oxide in glass used for bonding front and rear substrates of flat fluorescent lamps used for Liquid Crystal Displays (LCDs)\nExpires on 1 June 2011\n21\nLead and cadmium in printing inks for the application of enamels on glasses, such as borosilicate and soda lime glasses\nApplies to categories 8, 9 and 11 and expires on:\n21 July 2021 for categories 8 and 9 other than in vitro diagnostic medical devices and industrial monitoring and control instruments;\n21 July 2023 for category 8 in vitro diagnostic medical devices;\n21 July 2024 for category 9 industrial monitoring and control instruments, and for category 11.\n21(a)\nCadmium when used in colour printed glass to provide filtering functions, used as a component in lighting applications installed in displays and control panels of EEE\nApplies to categories 1 to 7 and 10 except applications covered by entry 21(b) or entry 39 and expires on 21 July 2021 .\n21(b)\nCadmium in printing inks for the application of enamels on glasses, such as borosilicate and soda lime glasses\nApplies to categories 1 to 7 and 10 except applications covered by entry 21(a) or 39 and expires on 21 July 2021 .\n21(c)\nLead in printing inks for the application of enamels on other than borosilicate glasses\nApplies to categories 1 to 7 and 10 and expires on 21 July 2021 .\n23\nLead in finishes of fine pitch components other than connectors with a pitch of 0,65 mm and less\nMay be used in spare parts for EEE placed on the market before 24 September 2010\n24\nLead in solders for the soldering to machined through hole discoidal and planar array ceramic multilayer capacitors\nExpires on:\n21 July 2021 for categories 1-7 and 10,\n21 July 2021 for categories 8 and 9 other than in vitro diagnostic medical devices and industrial monitoring and control instruments,\n21 July 2023 for category 8 in vitro diagnostic medical devices,\n21 July 2024 for category 9 industrial monitoring and control instruments, and for category 11.\n25\nLead oxide in surface conduction electron emitter displays (SED) used in structural elements, notably in the seal frit and frit ring\n26\nLead oxide in the glass envelope of black light blue lamps\nExpires on 1 June 2011\n27\nLead alloys as solder for transducers used in high-powered (designated to operate for several hours at acoustic power levels of 125 dB SPL and above) loudspeakers\nExpired on 24 September 2010\n29\nLead bound in crystal glass as defined in Annex I (Categories 1, 2, 3 and 4) of Council Directive 69/493/EEC\nExpires on:\n21 July 2021 for categories 1-7 and 10;\n21 July 2021 for categories 8 and 9 other than in vitro diagnostic medical devices and industrial monitoring and ontrol instruments;\n21 July 2023 for category 8 in vitro diagnostic medical devices;\n21 July 2024 for category 9 industrial monitoring and control instruments, and for category 11.\n30\nCadmium alloys as electrical/mechanical solder joints to electrical conductors located directly on the voice coil in transducers used in high-powered loudspeakers with sound pressure levels of 100 dB (A) and more\n31\nLead in soldering materials in mercury free flat fluorescent lamps (which, e.g. are used for liquid crystal displays, design or industrial lighting)\n32\nLead oxide in seal frit used for making window assemblies for Argon and Krypton laser tubes\nExpires on:\n21 July 2021 for categories 1-7 and 10,\n21 July 2021 for categories 8 and 9 other than in vitro diagnostic medical devices and industrial monitoring and control instruments,\n21 July 2023 for category 8 in vitro diagnostic medical devices,\n21 July 2024 for category 9 industrial monitoring and control instruments, and for category 11.\n33\nLead in solders for the soldering of thin copper wires of 100 μm diameter and less in power transformers\n34\nLead in cermet-based trimmer potentiometer elements\nApplies to all categories; expires on:\n21 July 2021 for categories 1-7 and 10,\n21 July 2021 for categories 8 and 9 other than in vitro diagnostic medical devices and industrial monitoring and control instruments,\n21 July 2023 for category 8 in vitro diagnostic medical devices,\n21 July 2024 for category 9 industrial monitoring and control instruments, and for category 11.\n36\nMercury used as a cathode sputtering inhibitor in DC plasma displays with a content up to 30 mg per display\nExpired on 1 July 2010\n37\nLead in the plating layer of high voltage diodes on the basis of a zinc borate glass body\nExpires on:\n21 July 2021 for categories 1-7 and 10;\n21 July 2021 for categories 8 and 9 other than in vitro diagnostic medical devices and industrial monitoring and control instruments;\n21 July 2023 for category 8 in vitro diagnostic medical devices;\n21 July 2024 for category 9 industrial monitoring and control instruments, and for category 11.\n38\nCadmium and cadmium oxide in thick film pastes used on aluminium bonded beryllium oxide\n39(a)\nCadmium selenide in downshifting cadmium-based semiconductor nanocrystal quantum dots for use in display lighting applications (< 0,2 μg Cd per mm 2 of display screen area)\nExpires for all categories on 31 October 2019\n40\nCadmium in photoresistors for analogue optocouplers applied in professional audio equipment\nExpires on 31 December 2013\n41\nLead in solders and termination finishes of electrical and electronic components and finishes of printed circuit boards used in ignition modules and other electrical and electronic engine control systems, which for technical reasons must be mounted directly on or in the crankcase or cylinder of hand-held combustion engines (classes SH:1, SH:2, SH:3 of Directive 97/68/EC of the European Parliament and of the Council )\nExpires on 31 December 2018\n42\nLead in bearings and bushes of diesel or gaseous fuel powered internal combustion engines applied in non-road professional use equipment:\nwith engine total displacement ≥ 15 litres;\nor\nwith engine total displacement < 15 litres and the engine is designed to operate in applications where the time between signal to start and full load is required to be less than 10 seconds; or regular maintenance is typically performed in a harsh and dirty outdoor environment, such as mining, construction, and agriculture applications.\nApplies to category 11, excluding applications covered by entry 6(c) of this Annex.\nExpires on 21 July 2024 .\n43\nBis(2-ethylhexyl) phthalate in rubber components in engine systems, designed for use in equipment that is not intended solely for consumer use and provided that no plasticised material comes into contact with human mucous membranes or into prolonged contact with human skin and the concentration value of bis(2-ethylhexyl) phthalate does not exceed:\n(a) 30 % by weight of the rubber for\n(i) gasket coatings;\n(ii) solid-rubber gaskets; or\n(iii) rubber components included in assemblies of at least three components using electrical, mechanical or hydraulic energy to do work, and attached to the engine.\n(b) 10 % by weight of the rubber for rubber-containing components not referred to in point (a).\nFor the purposes of this entry, ‘ prolonged contact with human skin ’ means continuous contact of more than 10 minutes duration or intermittent contact over a period of 30 minutes, per day.\nApplies to category 11 and expires on 21 July 2024 .\n44\nLead in solder of sensors, actuators, and engine control units of combustion engines within the scope of Regulation (EU) 2016/1628 of the European Parliament and of the Council , installed in equipment used at fixed positions while in operation which is designed for professionals, but also used by non-professional users\nApplies to category 11 and expires on 21 July 2024 .",
  "extent": "E+W+S+N.I.",
  "status": null,
  "version": "current",
  "annotations": [
    {
      "type": "F",
      "label": "F1",
      "text": "Inserted by Commission Delegated Directive 2014/72/EU of 13 March 2014 amending, for the purposes of adapting to technical progress, Annex III to Directive 2011/65/EU of the European Parliament and of the Council as regards an exemption for lead in solders and termination finishes of electrical and electronic components and finishes of printed circuit boards used in ignition modules and other electrical and electronic engine control systems (Text with EEA relevance)."
    },
    {
      "type": "F",
      "label": "F2",
      "text": "Substituted by Commission Delegated Directive (EU) 2019/174 of 16 November 2018 amending, for the purposes of adapting to scientific and technical progress, Annex III to Directive 2011/65/EU of the European Parliament and of the Council as regards an exemption for lead bound in crystal glass as defined in Directive 69/493/EEC (Text with EEA relevance)."
    },
    {
      "type": "F",
      "label": "F3",
      "text": "Inserted by Commission Delegated Directive (EU) 2019/1846 of 8 August 2019 amending, for the purposes of adapting to scientific and technical progress, Annex III to Directive 2011/65/EU of the European Parliament and of the Council as regards an exemption for lead in solders used in certain combustion engines (Text with EEA relevance)."
    },
    {
      "type": "F",
      "label": "F4",
      "text": "Inserted by Commission Delegated Directive 2014/14/EU of 18 October 2013 amending, for the purposes of adapting to technical progress, the Annex III to Directive 2011/65/EU of the European Parliament and of the Council as regards an exemption for 3,5 mg mercury per lamp in single capped compact fluorescent lamps for general lighting purposes < 30 W with a lifetime equal to or above 20000 h (Text with EEA relevance)."
    },
    {
      "type": "F",
      "label": "F5",
      "text": "Inserted by Commission Delegated Directive 2014/76/EU of 13 March 2014 amending, for the purposes of adapting to technical progress, Annex III to Directive 2011/65/EU of the European Parliament and of the Council as regards an exemption for Mercury in hand crafted luminous discharge tubes (HLDTs) used for signs, decorative or architectural and specialist lighting and light-artwork (Text with EEA relevance)."
    },
    {
      "type": "F",
      "label": "F6",
      "text": "Substituted by Commission Delegated Directive (EU) 2018/739 of 1 March 2018 amending, for the purposes of adapting to scientific and technical progress, Annex III to Directive 2011/65/EU of the European Parliament and of the Council as regards an exemption for lead as an alloying element in steel (Text with EEA relevance)."
    },
    {
      "type": "F",
      "label": "F7",
      "text": "Substituted by Commission Delegated Directive (EU) 2018/740 of 1 March 2018 amending, for the purposes of adapting to scientific and technical progress, Annex III to Directive 2011/65/EU of the European Parliament and of the Council as regards an exemption for lead as an alloying element in aluminium (Text with EEA relevance)."
    },
    {
      "type": "F",
      "label": "F8",
      "text": "Substituted by Commission Delegated Directive (EU) 2018/741 of 1 March 2018 amending, for the purposes of adapting to scientific and technical progress, Annex III to Directive 2011/65/EU of the European Parliament and of the Council as regards an exemption for lead as an alloying element in copper (Text with EEA relevance)."
    },
    {
      "type": "F",
      "label": "F9",
      "text": "Substituted by Commission Delegated Directive (EU) 2018/742 of 1 March 2018 amending, for the purposes of adapting to scientific and technical progress, Annex III to Directive 2011/65/EU of the European Parliament and of the Council as regards an exemption for lead in high melting temperature solders (Text with EEA relevance)."
    },
    {
      "type": "F",
      "label": "F10",
      "text": "Substituted by Commission Delegated Directive (EU) 2018/736 of 27 February 2018 amending, for the purposes of adapting to scientific and technical progress, Annex III to Directive 2011/65/EU of the European Parliament and of the Council as regards an exemption for certain electrical and electronic components containing lead in glass or ceramic (Text with EEA relevance)."
    },
    {
      "type": "F",
      "label": "F11",
      "text": "Substituted by Commission Delegated Directive (EU) 2019/169 of 16 November 2018 amending, for the purposes of adapting to scientific and technical progress, Annex III to Directive 2011/65/EU of the European Parliament and of the Council as regards an exemption for lead in dielectric ceramic in certain capacitors (Text with EEA relevance)."
    },
    {
      "type": "F",
      "label": "F12",
      "text": "Substituted by Commission Delegated Directive (EU) 2019/170 of 16 November 2018 amending, for the purposes of adapting to scientific and technical progress, Annex III to Directive 2011/65/EU of the European Parliament and of the Council as regards an exemption for lead in PZT based dielectric ceramic materials for certain capacitors (Text with EEA relevance)."
    },
    {
      "type": "F",
      "label": "F13",
      "text": "Substituted by Commission Delegated Directive (EU) 2019/171 of 16 November 2018 amending, for the purposes of adapting to scientific and technical progress, Annex III to Directive 2011/65/EU of the European Parliament and of the Council as regards an exemption for cadmium and its compounds in electrical contacts (Text with EEA relevance)."
    },
    {
      "type": "F",
      "label": "F14",
      "text": "Substituted by Commission Delegated Directive (EU) 2017/1010 of 13 March 2017 amending, for the purposes of adapting to technical progress, Annex III to Directive 2011/65/EU of the European Parliament and of the Council as regards an exemption for lead in bearing shells and bushes for certain refrigerant-containing compressors (Text with EEA relevance)."
    },
    {
      "type": "F",
      "label": "F15",
      "text": "Substituted by Commission Delegated Directive (EU) 2017/1011 of 15 March 2017 amending, for the purposes of adapting to technical progress, Annex III to Directive 2011/65/EU of the European Parliament and of the Council as regards an exemption for lead in white glasses used for optical applications (Text with EEA relevance)."
    },
    {
      "type": "F",
      "label": "F16",
      "text": "Substituted by Commission Delegated Directive (EU) 2017/1009 of 13 March 2017 amending, for the purposes of adapting to technical progress, Annex III to Directive 2011/65/EU of the European Parliament and of the Council as regards an exemption for cadmium and lead in filter glasses and glasses used for reflectance standards (Text with EEA relevance)."
    },
    {
      "type": "F",
      "label": "F17",
      "text": "Substituted by Commission Delegated Directive (EU) 2019/172 of 16 November 2018 amending, for the purposes of adapting to scientific and technical progress, Annex III to Directive 2011/65/EU of the European Parliament and of the Council as regards an exemption for lead in solders to complete a viable electrical connection between semiconductor die and carrier within integrated circuit flip chip packages (Text with EEA relevance)."
    },
    {
      "type": "F",
      "label": "F18",
      "text": "Substituted by Commission Delegated Directive (EU) 2019/177 of 16 November 2018 amending, for the purposes of adapting to scientific and technical progress, Annex III to Directive 2011/65/EU of the European Parliament and of the Council as regards an exemption for lead as activator in the fluorescent powder of discharge lamps containing phosphors (Text with EEA relevance)."
    },
    {
      "type": "F",
      "label": "F19",
      "text": "Substituted by Commission Delegated Directive (EU) 2019/173 of 16 November 2018 amending, for the purposes of adapting to scientific and technical progress, Annex III to Directive 2011/65/EU of the European Parliament and of the Council as regards an exemption for lead and cadmium in printing inks for the application of enamels on glasses (Text with EEA relevance)."
    },
    {
      "type": "F",
      "label": "F20",
      "text": "Substituted by Commission Delegated Directive (EU) 2018/737 of 27 February 2018 amending, for the purposes of adapting to scientific and technical progress, Annex III to Directive 2011/65/EU of the European Parliament and of the Council as regards an exemption for lead in solders for the soldering to machined through hole discoidal and planar array ceramic multilayer capacitors (Text with EEA relevance)."
    },
    {
      "type": "F",
      "label": "F21",
      "text": "Substituted by Commission Delegated Directive (EU) 2019/175 of 16 November 2018 amending, for the purposes of adapting to scientific and technical progress, Annex III to Directive 2011/65/EU of the European Parliament and of the Council as regards an exemption for lead oxide in seal frit used for making window assemblies for certain laser tubes (Text with EEA relevance)."
    },
    {
      "type": "F",
      "label": "F22",
      "text": "Substituted by Commission Delegated Directive (EU) 2018/738 of 27 February 2018 amending, for the purposes of adapting to scientific and technical progress, Annex III to Directive 2011/65/EU of the European Parliament and of the Council as regards an exemption for lead in cermet-based trimmer potentiometer elements (Text with EEA relevance)."
    },
    {
      "type": "F",
      "label": "F23",
      "text": "Substituted by Commission Delegated Directive (EU) 2019/176 of 16 November 2018 amending, for the purposes of adapting to scientific and technical progress, Annex III to Directive 2011/65/EU of the European Parliament and of the Council as regards an exemption for lead in the plating layer of certain diodes (Text with EEA relevance)."
    },
    {
      "type": "F",
      "label": "F24",
      "text": "Substituted by Commission Delegated Directive (EU) 2017/1975 of 7 August 2017 amending, for the purposes of adapting to scientific and technical progress, Annex III to Directive 2011/65/EU of the European Parliament and of the Council as regards an exemption for cadmium in colour converting light-emitting diodes (LEDs) for use in display systems (Text with EEA relevance)."
    },
    {
      "type": "F",
      "label": "F25",
      "text": "Inserted by Commission Delegated Directive 2012/51/EU of 10 October 2012 amending, for the purposes of adapting to technical progress, Annex III to Directive 2011/65/EU of the European Parliament and of the Council as regards an exemption for applications containing cadmium (Text with EEA relevance)."
    },
    {
      "type": "F",
      "label": "F26",
      "text": "Inserted by Commission Delegated Directive (EU) 2019/178 of 16 November 2018 amending, for the purposes of adapting to scientific and technical progress, Annex III to Directive 2011/65/EU of the European Parliament and of the Council as regards an exemption for lead in bearings and bushes applied in certain non-road professional use equipment (Text with EEA relevance)."
    },
    {
      "type": "F",
      "label": "F27",
      "text": "Inserted by Commission Delegated Directive (EU) 2019/1845 of 8 August 2019 amending, for the purposes of adapting to scientific and technical progress, Annex III to Directive 2011/65/EU of the European Parliament and of the Council as regards an exemption for bis(2-ethylhexyl) phthalate (DEHP) in certain rubber components used in engine systems (Text with EEA relevance)."
    },
    {
      "type": "X",
      "label": "X1",
      "text": "Substituted by Corrigendum to Commission Delegated Directive (EU) 2017/1975 of 7 August 2017 amending, for the purposes of adapting to scientific and technical progress, Annex III to Directive 2011/65/EU of the European Parliament and of the Council as regards an exemption for cadmium in colour converting light-emitting diodes (LEDs) for use in display systems (Official Journal of the European Union L 281 of 31 October 2017)."
    },
    {
      "type": "footnote",
      "label": "f1",
      "text": "Council Directive 69/493/EEC of 15 December 1969 on the approximation of the laws of the Member States relating to crystal glass ( OJ L 326, 29.12.1969, p. 36 )."
    },
    {
      "type": "footnote",
      "label": "f2",
      "text": "Directive 97/68/EC of the European Parliament and of the Council of 16 December 1997 on the approximation of the laws of the Member States relating to measures against the emission of gaseous and particulate pollutants from internal combustion engines to be installed in non-road mobile machinery ( OJ L 59, 27.2.1998, p. 1 )."
    },
    {
      "type": "footnote",
      "label": "f3",
      "text": "Regulation (EU) 2016/1628 of the European Parliament and of the Council of 14 September 2016 on requirements relating to gaseous and particulate pollutant emission limits and type-approval for internal combustion engines for non-road mobile machinery, amending Regulations (EU) No 1024/2012 and (EU) No 167/2013, and amending and repealing Directive 97/68/EC ( OJ L 252, 16.9.2016, p. 53 )."
    }
  ],
  "outstanding_effects": [],
  "provenance": {
    "source": "legislation.gov.uk",
    "source_url": "https://www.legislation.gov.uk/eudr/2011/65/annex/III",
    "retrieved_at": "2026-11-01T15:21:59.710339+00:00"
  },
  "licence": "Open Government Licence v3.0",
  "licence_url": "https://www.nationalarchives.gov.uk/doc/open-government-licence/version/3/",
  "attribution": "Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives."
}