Division 2 F1

identification, or in the case of point 2(a)(i), identification or estimation, of current heating and cooling supply:

1. (a)

   by technology, in GWh per year ^f1 , within sectors mentioned under point 1 where possible, distinguishing between energy derived from fossil and renewable sources:

   1. (i)

      provided on-site in residential and service sites by:

      • heat only boilers;

      • high-efficiency heat and power cogeneration;

      • heat pumps;

      • other on-site technologies and sources;

   2. (ii)

      provided on-site in non-service and non-residential sites by:

      • heat only boilers;

      • high-efficiency heat and power cogeneration;

      • heat pumps;

      • other on-site technologies and sources;

   3. (iii)

      provided off-site by:

      • high-efficiency heat and power cogeneration;

      • waste heat;

      • other off-site technologies and sources;

2. (b)

   identification of installations that generate waste heat or cold and their potential heating or cooling supply, in GWh per year:

   1. (i)

      thermal power generation installations that can supply or can be retrofitted to supply waste heat with a total thermal input exceeding 50 MW;

   2. (ii)

      heat and power cogeneration installations using technologies referred to in Part II of Annex I with a total thermal input exceeding 20 MW;

   3. (iii)

      waste incineration plants;

   4. (iv)

      renewable energy installations with a total thermal input exceeding 20 MW other than the installations specified under point 2(b)(i) and (ii) generating heating or cooling using the energy from renewable sources;

   5. (v)

      industrial installations with a total thermal input exceeding 20 MW which can provide waste heat;

3. (c)

   reported share of energy from renewable sources and from waste heat or cold in the final energy consumption of the district heating and cooling ^f2 sector over the past 5 years, in line with Directive (EU) 2018/2001;