OpenLegislation

Annex II

United Kingdom

Original text. Later amendments are not shown.

Annex II to Directive 97/68/EC is amended as follows:

  1. (1)

    Appendix 1 is amended as follows:

    1. (a)

      the heading of Section 3 is replaced by the following:

      ‘FUEL FEED FOR DIESEL ENGINES’;

    2. (b)

      Section 4 is replaced by the following:

      ‘4.

      FUEL FEED FOR PETROL ENGINES (*)

      4.1.

      Carburettor: …

      4.1.1.

      Make(s): …

      4.1.2.

      Type(s): …

      4.2.

      Port fuel injection: single-point or multi-point: …

      4.2.1.

      Make(s): …

      4.2.2.

      Type(s): …

      4.3.

      Direct injection: …

      4.3.1.

      Make(s): …

      4.3.2.

      Type(s): …

      4.4.

      Fuel flow [g/h] and air/fuel ratio at rated speed and wide open throttle:’;

    3. (c)

      the following Sections 5, 6 and 7 are added:

      ‘5.

      VALVE TIMING

      5.1.

      Maximum lift and angles of opening and closing in relation to dead centres or equivalent data: …

      5.2.

      Reference and/or setting rangesf1

      5.3.

      Variable valve timing system (if applicable and where intake and/or exhaust)

      5.3.1.

      Type: continuous or on/off

      5.3.2.

      Cam phase shift angle: …

      6.

      PORTING CONFIGURATION

      6.1.

      Position, size and number:

      7.

      IGNITION SYSTEM

      7.1.

      Ignition coil

      7.1.1.

      Make(s): …

      7.1.2.

      Type(s): …

      7.1.3.

      Number: …

      7.2.

      Spark plug(s): …

      7.2.1.

      Make(s): …

      7.2.2.

      Type(s): …

      7.3.

      Magneto: …

      7.3.1.

      Make(s): …

      7.3.2.

      Type(s): …

      7.4.

      Ignition timing: …

      7.4.1.

      Static advance with respect to top dead centre [crank angle degrees] …

      7.4.2.

      Advance curve, if applicable: …’;

  2. (2)

    Appendix 2 is amended as follows:

    1. (a)

      Section 1.8 is replaced by the following:

      ‘1.8.

      Exhaust after-treatment systemf2: …’;

    2. (b)

      the table in Section 2.2 is replaced by the following:

      For full details see Appendix 1.

      For full details see Appendix 3.’
      ‘Parent Enginef3 Engines within familyf4
      Engine Type
      No of cylinders
      Rated speed (min-1)
      Fuel delivery per stroke (mm3) for diesel engines, fuel flow (g/h) for petrol engines, at rated net power
      Rated net power (kW)
      Maximum power speed (min-1)
      Maximum net power (kW)
      Maximum torque speed (min-1)
      Fuel delivery per stroke (mm3) for diesel engines, fuel flow (g/h) for petrol engines, at maximum torque
      Maximum torque (Nm)
      Low idle speed (min-1)
      Cylinder displacement (in % of parent engine)100

Annotations

Footnotes

f1

Strike out what does not apply.

f2

If not applicable mark n.a.’;

f3

For full details see Appendix 1.

f4

For full details see Appendix 3.’