{
  "url": "https://openlegislation.uk/eu-directive-2012-46/annex-V",
  "json_url": "https://openlegislation.uk/eu-directive-2012-46/annex-V.json",
  "legislation": "eudr/2012/46",
  "legislation_title": "Commission Directive 2012/46/EU of 6 December 2012 amending Directive 97/68/EC of the European Parliament and of the Council on the approximation of the laws of the Member States relating to measures against the emission of gaseous and particulate pollutants from internal combustion engines to be installed in non-road mobile machinery (Text with EEA relevance)",
  "legislation_url": "https://openlegislation.uk/eu-directive-2012-46",
  "path": "annex/V",
  "kind": "annex",
  "number": "V",
  "heading": null,
  "text": "In Annex VII to Directive 97/68/EC Appendix 1 is replaced by the following:\n‘Appendix 1\nTest report for compression ignition engines test results\nInformation concerning the test engine\nEngine type: …\nEngine identification number: …\n1.\nInformation concerning the conduct of the test: …\n1.1.\nReference fuel used for test\n1.1.1.\nCetane number: …\n1.1.2.\nSulphur content: …\n1.1.3.\nDensity: …\n1.2.\nLubricant\n1.2.1.\nMake(s): …\n1.2.2.\nType(s): …\n(state percentage of oil in mixture if lubricant and fuel are mixed)\n1.3.\nEngine driven equipment (if applicable)\n1.3.1.\nEnumeration and identifying details: …\n1.3.2.\nPower absorbed at indicated engine speeds (as specified by the manufacturer):\nDelete as appropriate.\nShall not be greater than 10 per cent of the power measured during the test.\nInsert values at engine speed corresponding to 100 % normalised speed if NRSC test uses this speed.\nPower PAE (kW) absorbed at various engine speeds , taking into account Appendix 3 to this Annex\nEquipment\nIntermediate speed(if applicable)\nMaximum power speed(if different from rated)\nRated speed\nTotal:\n1.4.\nEngine performance\n1.4.1.\nEngine speeds:\nIdle: … min–1\nIntermediate: … min–1\nMaximum power: … min–1\nRated: … min–1\n1.4.2.\nEngine power\nReplace with values at engine speed corresponding to 100 % normalised speed if NRSC test uses this speed.\nPower setting (kW) at various engine speeds\nCondition\nIntermediate speed(if applicable)\nMaximum power speed(if different from rated)\nRated speed\nMaximum power measured at specified test speed (PM) (kW) (a)\nTotal power absorbed by engine driven equipment as per paragraph 1.3.2 of this Appendix taking into account Appendix 3 (kW) (b)\nNet engine power as specified in Section 2.4 of Annex I (kW) (c)\nc = a + b\n2.\nInformation concerning the conduct of the NRSC test:\n2.1.\nDynamometer setting (kW)\nReplace with values at engine speed corresponding to 100 % normalised speed if NRSC test uses this speed.\nDynamometer setting (kW) at various engine speeds\nPer cent load\nIntermediate speed(if applicable)\n63 %(if applicable)\n80 %(if applicable)\n91 %(if applicable)\nRated speed\n10\n(if applicable)\n25\n(if applicable)\n50\n75\n(if applicable)\n100\n2.2.\nEmission results of the engine/parent engine\nDeterioration Factor (DF): calculated/fixed\nSpecify the DF values and the emission results in the following table:\nNRSC test\nDF\nmult/add3\nCO\nHC\nNOx\nHC + NOx\nPM\nEmissions\nCO(g/kWh)\nHC(g/kWh)\nNOx(g/kWh)\nHC + NOx(g/kWh)\nPM(g/kWh)\nCO2(g/kWh)\nTest result\nFinal test result with DF\nAdditional control area test points (if applicable)\nEmissions at test point\nEngine speed\nLoad(%)\nCO(g/kWh)\nHC(g/kWh)\nNOx(g/kWh)\nPM(g/kWh)\nTest result 1\nTest result 2\nTest result 3\n2.3.\nSampling system used for the NRSC test:\n2.3.1.\nGaseous emissions: …\n2.3.2.\nPM: …\n2.3.2.1.\nMethod: single/multiple filter\n3.\nInformation concerning the conduct of the NRTC test (if applicable):\n3.1.\nEmission results of the engine/parent engine\nDeterioration Factor (DF): calculated/fixed\nSpecify the DF values and the emission results in the following table:\nRegeneration related data may be reported for Stage IV engines.\nDelete as appropriate.\nNRTC test\nDF\nmult/add\nCO\nHC\nNOx\nHC + NOx\nPM\nEmissions\nCO(g/kWh)\nHC(g/kWh)\nNOx(g/kWh)\nHC + NOx(g/kWh)\nPM(g/kWh)\nCold start\nEmissions\nCO(g/kWh)\nHC(g/kWh)\nNOx(g/kWh)\nHC + NOx(g/kWh)\nPM(g/kWh)\nCO2(g/kWh)\nHot start w/o regeneration\nHot start with regeneration\nkr,u\n(mult/add)\nkr,d\n(mult/add)\nWeighted test result\nFinal test result with DF\nCycle work for hot start w/o regeneration kWh\n3.2.\nSampling system used for the NRTC test:\nGaseous emissions: …\nPM: …\nMethod: single/multiple filter",
  "extent": "E+W+S+N.I.",
  "status": null,
  "version": "current",
  "annotations": [
    {
      "type": "footnote",
      "label": "f1",
      "text": "For the case of several parent engines, the following is to be indicated for each of them."
    },
    {
      "type": "footnote",
      "label": "f2",
      "text": "Delete as appropriate."
    },
    {
      "type": "footnote",
      "label": "f3",
      "text": "Shall not be greater than 10 per cent of the power measured during the test."
    },
    {
      "type": "footnote",
      "label": "f4",
      "text": "Insert values at engine speed corresponding to 100 % normalised speed if NRSC test uses this speed."
    },
    {
      "type": "footnote",
      "label": "f5",
      "text": "Insert engine speed corresponding to 100 % normalised speed if NRSC test uses this speed."
    },
    {
      "type": "footnote",
      "label": "f6",
      "text": "Uncorrected power measured in accordance with Section 2.4 of Annex I."
    },
    {
      "type": "footnote",
      "label": "f7",
      "text": "Replace with values at engine speed corresponding to 100 % normalised speed if NRSC test uses this speed."
    },
    {
      "type": "footnote",
      "label": "f8",
      "text": "Replace with values at engine speed corresponding to 100 % normalised speed if NRSC test uses this speed."
    },
    {
      "type": "footnote",
      "label": "f9",
      "text": "Delete as appropriate."
    },
    {
      "type": "footnote",
      "label": "f10",
      "text": "Indicate figure number of system used as defined in Annex VI Section 1 or Section 9 of Annex 4B of ECE R96 03 series of amendments, as applicable."
    },
    {
      "type": "footnote",
      "label": "f11",
      "text": "Delete as appropriate."
    },
    {
      "type": "footnote",
      "label": "f12",
      "text": "Delete as appropriate."
    },
    {
      "type": "footnote",
      "label": "f13",
      "text": "Indicate figure number of system used as defined in Annex VI Section 1 or Section 9 of Annex 4B of ECE R96 03 series of amendments, as applicable."
    },
    {
      "type": "footnote",
      "label": "f14",
      "text": "Delete as appropriate.’"
    }
  ],
  "outstanding_effects": [],
  "provenance": {
    "source": "legislation.gov.uk",
    "source_url": "https://www.legislation.gov.uk/eudr/2012/46/annex/V",
    "retrieved_at": "2026-11-01T15:21:55.587978+00:00"
  },
  "licence": "Open Government Licence v3.0",
  "licence_url": "https://www.nationalarchives.gov.uk/doc/open-government-licence/version/3/",
  "attribution": "Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives."
}