# Commission Directive 2012/46/EU of 6 December 2012 amending Directive 97/68/EC of the European Parliament and of the Council on the approximation of the laws of the Member States relating to measures against the emission of gaseous and particulate pollutants from internal combustion engines to be installed in non-road mobile machinery (Text with EEA relevance), Annex V

Extent: E+W+S+N.I.

In Annex VII to Directive 97/68/EC Appendix 1 is replaced by the following:
‘Appendix 1
Test report for compression ignition engines test results
Information concerning the test engine
Engine type: …
Engine identification number: …
1.
Information concerning the conduct of the test: …
1.1.
Reference fuel used for test
1.1.1.
Cetane number: …
1.1.2.
Sulphur content: …
1.1.3.
Density: …
1.2.
Lubricant
1.2.1.
Make(s): …
1.2.2.
Type(s): …
(state percentage of oil in mixture if lubricant and fuel are mixed)
1.3.
Engine driven equipment (if applicable)
1.3.1.
Enumeration and identifying details: …
1.3.2.
Power absorbed at indicated engine speeds (as specified by the manufacturer):
Delete as appropriate.
Shall not be greater than 10 per cent of the power measured during the test.
Insert values at engine speed corresponding to 100 % normalised speed if NRSC test uses this speed.
Power PAE (kW) absorbed at various engine speeds , taking into account Appendix 3 to this Annex
Equipment
Intermediate speed(if applicable)
Maximum power speed(if different from rated)
Rated speed
Total:
1.4.
Engine performance
1.4.1.
Engine speeds:
Idle: … min–1
Intermediate: … min–1
Maximum power: … min–1
Rated: … min–1
1.4.2.
Engine power
Replace with values at engine speed corresponding to 100 % normalised speed if NRSC test uses this speed.
Power setting (kW) at various engine speeds
Condition
Intermediate speed(if applicable)
Maximum power speed(if different from rated)
Rated speed
Maximum power measured at specified test speed (PM) (kW) (a)
Total power absorbed by engine driven equipment as per paragraph 1.3.2 of this Appendix taking into account Appendix 3 (kW) (b)
Net engine power as specified in Section 2.4 of Annex I (kW) (c)
c = a + b
2.
Information concerning the conduct of the NRSC test:
2.1.
Dynamometer setting (kW)
Replace with values at engine speed corresponding to 100 % normalised speed if NRSC test uses this speed.
Dynamometer setting (kW) at various engine speeds
Per cent load
Intermediate speed(if applicable)
63 %(if applicable)
80 %(if applicable)
91 %(if applicable)
Rated speed
10
(if applicable)
25
(if applicable)
50
75
(if applicable)
100
2.2.
Emission results of the engine/parent engine
Deterioration Factor (DF): calculated/fixed
Specify the DF values and the emission results in the following table:
NRSC test
DF
mult/add3
CO
HC
NOx
HC + NOx
PM
Emissions
CO(g/kWh)
HC(g/kWh)
NOx(g/kWh)
HC + NOx(g/kWh)
PM(g/kWh)
CO2(g/kWh)
Test result
Final test result with DF
Additional control area test points (if applicable)
Emissions at test point
Engine speed
Load(%)
CO(g/kWh)
HC(g/kWh)
NOx(g/kWh)
PM(g/kWh)
Test result 1
Test result 2
Test result 3
2.3.
Sampling system used for the NRSC test:
2.3.1.
Gaseous emissions: …
2.3.2.
PM: …
2.3.2.1.
Method: single/multiple filter
3.
Information concerning the conduct of the NRTC test (if applicable):
3.1.
Emission results of the engine/parent engine
Deterioration Factor (DF): calculated/fixed
Specify the DF values and the emission results in the following table:
Regeneration related data may be reported for Stage IV engines.
Delete as appropriate.
NRTC test
DF
mult/add
CO
HC
NOx
HC + NOx
PM
Emissions
CO(g/kWh)
HC(g/kWh)
NOx(g/kWh)
HC + NOx(g/kWh)
PM(g/kWh)
Cold start
Emissions
CO(g/kWh)
HC(g/kWh)
NOx(g/kWh)
HC + NOx(g/kWh)
PM(g/kWh)
CO2(g/kWh)
Hot start w/o regeneration
Hot start with regeneration
kr,u
(mult/add)
kr,d
(mult/add)
Weighted test result
Final test result with DF
Cycle work for hot start w/o regeneration kWh
3.2.
Sampling system used for the NRTC test:
Gaseous emissions: …
PM: …
Method: single/multiple filter

---
Source: https://www.legislation.gov.uk/eudr/2012/46/annex/V (the official version)
Page: https://openlegislation.uk/eu-directive-2012-46/annex-V
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.