{
  "url": "https://openlegislation.uk/eu-directive-2014-33/annex-XI/division-CONFORMITY/division-3/division-3.2",
  "json_url": "https://openlegislation.uk/eu-directive-2014-33/annex-XI/division-CONFORMITY/division-3/division-3.2.json",
  "legislation": "eudr/2014/33",
  "legislation_title": "Directive 2014/33/EU of the European Parliament and of the Council of 26 February 2014 on the harmonisation of the laws of the Member States relating to lifts and safety components for lifts (recast) (Text with EEA relevance)",
  "legislation_url": "https://openlegislation.uk/eu-directive-2014-33",
  "path": "annex/XI/division/CONFORMITY/division/3/division/3.2",
  "kind": "division",
  "number": "3.2",
  "heading": null,
  "text": "The quality system shall ensure compliance of the lifts with the applicable essential health and safety requirements set out in Annex I. All the elements, requirements and provisions adopted by the installer shall be documented in a systematic and orderly manner in the form of written policies, procedures and instructions. This quality system documentation shall permit a consistent interpretation of the quality programmes, plans, manuals and quality records.\nIt shall contain in particular an adequate description of:\n(a) the quality objectives and the organisational structure, responsibilities and powers of the management with regard to design and product quality;\n(b) the technical design specifications, including standards that will be applied and, where the relevant harmonised standards will not be applied in full, the means, including other relevant technical specifications that will be used to ensure that the applicable essential health and safety requirements set out in Annex I will be met;\n(c) the design control and design verification techniques, processes and systematic actions that will be used when designing the lifts;\n(d) the examinations and tests that will be carried out on acceptance of the supplies of materials, components and sub-assemblies;\n(e) the corresponding assembly, installation, quality control and quality assurance techniques, processes and systematic actions that will be used;\n(f) the examinations and tests that will be carried out before (inspection of installation conditions: shaft, housing of machinery, etc.), during and after installation (including at least the tests laid down in point 3.3 of Annex V);\n(g) the quality records, such as inspection reports and test data, calibration data, reports on the qualifications of the personnel concerned;\n(h) the means of monitoring the achievement of the required design and product quality and the effective operation of the quality system.",
  "extent": "E+W+S+N.I.",
  "status": null,
  "version": "current",
  "annotations": [],
  "outstanding_effects": [],
  "provenance": {
    "source": "legislation.gov.uk",
    "source_url": "https://www.legislation.gov.uk/eudr/2014/33/annex/XI/division/CONFORMITY/division/3/division/3.2",
    "retrieved_at": "2026-11-01T15:21:47.164920+00:00"
  },
  "licence": "Open Government Licence v3.0",
  "licence_url": "https://www.nationalarchives.gov.uk/doc/open-government-licence/version/3/",
  "attribution": "Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives."
}