{
  "url": "https://openlegislation.uk/eu-directive-2014-43/annex",
  "json_url": "https://openlegislation.uk/eu-directive-2014-43/annex.json",
  "legislation": "eudr/2014/43",
  "legislation_title": "Commission Directive 2014/43/EU of 18 March 2014 amending Annexes I, II and III to Directive 2000/25/EC of the European Parliament and of the Council on action to be taken against the emission of gaseous and particulate pollutants by engines intended to power agricultural or forestry tractors (Text with EEA relevance)",
  "legislation_url": "https://openlegislation.uk/eu-directive-2014-43",
  "path": "annex",
  "kind": "annex",
  "number": null,
  "heading": null,
  "text": "Annexes I, II and III to Directive 2000/25/EC are amended as follows:\n(1) Annex I is amended as follows:\n(a) Section 3 is replaced by the following:\n‘3.\nSPECIFICATIONS AND TESTS\nThe provisions of Annex I, Sections 4, 8 and 9, Appendices 1 and 2, and Annexes III, IV and V to Directive 97/68/EC shall apply.’;\n(b) Appendix 1 is amended as follows:\n(i) Section 2.2 is replaced by the following:\n‘2.2.\nMeasures taken against air pollution\n2.2.1.\nDevice for recycling crankcase gases: yes/no (1) …\n2.2.2.\nAdditional anti-pollution devices (if any, and if not covered by another heading)\n2.2.2.1.\nCatalytic converter: yes/no (1)\n2.2.2.1.1.\nMake(s): …\n2.2.2.1.2.\nType(s): …\n2.2.2.1.3.\nNumber of catalytic converters and elements …\n2.2.2.1.4.\nDimensions- and volume of the catalytic converter(s): …\n2.2.2.1.5.\nType of catalytic action: …\n2.2.2.1.6.\nTotal charge of precious metals: …\n2.2.2.1.7.\nRelative concentration: …\n2.2.2.1.8.\nSubstrate (structure and material): …\n2.2.2.1.9.\nCell density: …\n2.2.2.1.10.\nType of casing for the catalytic converter(s): …\n2.2.2.1.11.\nLocation of the catalytic converter(s) (place(s) and maximum/minimum distance(s) from engine): …\n2.2.2.1.12.\nNormal operating range (K): …\n2.2.2.1.13.\nConsumable reagent (where appropriate): …\n2.2.2.1.13.1.\nType and concentration of reagent needed for catalytic action: …\n2.2.2.1.13.2.\nNormal operational temperature range of reagent: …\n2.2.2.1.13.3.\nInternational standard (where appropriate): …\n2.2.2.1.14.\nNOx sensor: yes/no (1)\n2.2.2.2.\nOxygen sensor: yes/no (1)\n2.2.2.2.1.\nMake(s): …\n2.2.2.2.2.\nType: …\n2.2.2.2.3.\nLocation: …\n2.2.2.3.\nAir injection: yes/no (1)\n2.2.2.3.1.\nType (pulse air, air pump, etc.): …\n2.2.2.4.\nEGR: yes/no (1)\n2.2.2.4.1.\nCharacteristics (cooled/uncooled, high pressure/low pressure, etc.): …\n2.2.2.5.\nParticulate trap: yes/no (1)\n2.2.2.5.1.\nDimensions and capacity of the particulate trap: …\n2.2.2.5.2.\nType and design of the particulate trap: …\n2.2.2.5.3.\nLocation (place(s) and maximum/minimum distance(s) from engine): …\n2.2.2.5.4.\nMethod or system of regeneration, description and/or drawing: …\n2.2.2.5.5.\nNormal operating temperature (K) and pressure (kPa) range: …\n2.2.2.6.\nOther systems: yes/no (1)\n2.2.2.6.1.\nDescription and operation: …’;\n(ii) Section 2.4 is replaced by the following:\n‘2.4.\nValve timing\n2.4.1.\nMaximum lift and angles of opening and closing in relation to dead centres or equivalent data: …\n2.4.2.\nReference and/or setting ranges (1)\n2.4.3.\nVariable valve timing system (if applicable and where intake and/or exhaust)\n2.4.3.1.\nType: continuous or on/off (1)\n2.4.3.2.\nCam phase shift angle: …’;\n(iii) in Section 3.1.2, the table is replaced by the following:\nFor full details see Section 2.\nFor full details see Section 4.’;\n‘Parent engine\nEngines within family\nEngine type\nNo of cylinders\nRated speed (min-1)\nFuel delivery per stroke (mm3) for diesel engines, fuel flow (g/h) for petrol engines, at rated net power\nRated net power (kW)\nMaximum power speed (min-1)\nMaximum net power (kW)\nMaximum torque speed (min-1)\nFuel delivery per stroke (mm3) for diesel engines, fuel flow (g/h) for petrol engines, at maximum torque\nMaximum torque (Nm)\nLow idle speed (min-1)\nCylinder displacement (in % of parent engine)\n100\n(iv) Section 4.2 is replaced by the following:\n‘4.2.\nMeasures taken against air pollution\n4.2.1.\nDevice for recycling crankcase gases: yes/no (1) …\n4.2.2.\nAdditional anti-pollution devices (if any, and if not covered by another heading)\n4.2.2.1.\nCatalytic converter: yes/no (1)\n4.2.2.1.1.\nMake(s): …\n4.2.2.1.2.\nType(s): …\n4.2.2.1.3.\nNumber of catalytic converters and elements …\n4.2.2.1.4.\nDimensions- and volume of the catalytic converter(s): …\n4.2.2.1.5.\nType of catalytic action: …\n4.2.2.1.6.\nTotal charge of precious metals: …\n4.2.2.1.7.\nRelative concentration: …\n4.2.2.1.8.\nSubstrate (structure and material): …\n4.2.2.1.9.\nCell density: …\n4.2.2.1.10.\nType of casing for the catalytic converter(s): …\n4.2.2.1.11.\nLocation of the catalytic converter(s) (place(s) and maximum/minimum distance(s) from engine): …\n4.2.2.1.12.\nNormal operating range (K): …\n4.2.2.1.13.\nConsumable reagent (where appropriate): …\n4.2.2.1.13.1.\nType and concentration of reagent needed for catalytic action: …\n4.2.2.1.13.2.\nNormal operational temperature range of reagent: …\n4.2.2.1.13.3.\nInternational standard (where appropriate): …\n4.2.2.1.14.\nNOx sensor: yes/no (1)\n4.2.2.2.\nOxygen sensor: yes/no (1)\n4.2.2.2.1.\nMake(s): …\n4.2.2.2.2.\nType: …\n4.2.2.2.3.\nLocation: …\n4.2.2.3.\nAir injection: yes/no (1)\n4.2.2.3.1.\nType (pulse air, air pump, etc.): …\n4.2.2.4.\nEGR: yes/no (1)\n4.2.2.4.1.\nCharacteristics (cooled/uncooled, high pressure/low pressure, etc.): …\n4.2.2.5.\nParticulate trap: yes/no (1)\n4.2.2.5.1.\nDimensions and capacity of the particulate trap: …\n4.2.2.5.2.\nType and design of the particulate trap: …\n4.2.2.5.3.\nLocation (place(s) and maximum/minimum distance(s) from engine): …\n4.2.2.5.4.\nMethod or system of regeneration, description and/or drawing: …\n4.2.2.5.5.\nNormal operating temperature (K) and pressure (kPa) range: …\n4.2.2.6.\nOther systems: yes/no (1)\n4.2.2.6.1.\nDescription and operation: …’;\n(v) Section 4.4 is replaced by the following\n‘4.4.\nValve timing\n4.4.1.\nMaximum lift and angles of opening and closing in relation to dead centres or equivalent data: …\n4.4.2.\nReference and/or setting ranges (1): …\n4.4.3.\nVariable valve timing system (if applicable and where intake and/or exhaust)\n4.4.3.1.\nType: continuous or on/off\n4.4.3.2.\nCam phase shift angle: …’;\n(c) Appendix 2 is amended as follows:\n(i) Section 2.4 is replaced by the following:\n‘2.4.\nEmission results of the engine/parent engine (1)\n2.4.1.\nInformation concerning the conduct of the NRSC test\nDeterioration Factor (DF): calculated/fixed (1)\nSpecify the DF values and the emission results in the following table:\nNRSC test\nDF mult/add (1)\nCO\nHC\nNOx\nHC+NOx\nPM\nEmissions\nCO(g/kWh)\nHC(g/kWh)\nNOx(g/kWh)\nHC+NOx(g/kWh)\nPM(g/kWh)\nCO2(g/kWh)\nTest result\nFinal test result with DF\nAdditional control area test points (if applicable)\nEmissions at test point\nEngine speed\nLoad(%)\nCO(g/kWh)\nHC(g/kWh)\nNOx(g/kWh)\nPM(g/kWh)\nTest result 1\nTest result 2\nTest result 3\n2.4.1.2.\nSampling system used for the NRSC test: …\n2.4.1.2.1.\nGaseous emissions (*): …\n2.4.1.2.2.\nPM(*): …\n2.4.1.2.3.\nMethod: single/multiple filter (1)\n2.4.2.\nInformation concerning the conduct of the NRTC test (if applicable):\n2.4.2.1.\nEmission results of the engine/parent engine\nDeterioration Factor (DF): calculated/fixed (1)\nSpecify the DF values and the emission results in the following table:\nRegeneration related data may be reported for Stage IV engines.\nNRTC test\nDF mult/add (1)\nCO\nHC\nNOx\nHC+NOx\nPM\nEmissions\nCO(g/kWh)\nHC(g/kWh)\nNOx(g/kWh)\nHC+NOx(g/kWh)\nPM(g/kWh)\nCold start\nEmissions\nCO(g/kWh)\nHC(g/kWh)\nNOx(g/kWh)\nHC+NOx(g/kWh)\nPM(g/kWh)\nCO2(g/kWh)\nHot start w/o regeneration\nHot start with regeneration\nkr,u (mult/add) (1)\nkr,d (mult/add) (1)\nWeighted test result\nFinal test result with DF\nCycle work for hot start w/o regeneration kWh\n2.4.2.2.\nSampling system used for the NRTC test:\nGaseous emissions: …\nPM: …\nMethod: single/multiple filter ’;\n(2) in Annex II, Appendix 1 is amended as follows:\n(a) Section 2.2 is replaced by the following:\n‘2.2.\nMeasures taken against air pollution\n2.2.1.\nDevice for recycling crankcase gases: yes/no (1) …\n2.2.2.\nAdditional anti-pollution devices (if any, and if not covered by another heading)\n2.2.2.1.\nCatalytic converter: yes/no (1)\n2.2.2.1.1.\nMake(s): …\n2.2.2.1.2.\nType(s): …\n2.2.2.1.3.\nNumber of catalytic converters and elements …\n2.2.2.1.4.\nDimensions- and volume of the catalytic converter(s): …\n2.2.2.1.5.\nType of catalytic action: …\n2.2.2.1.6.\nTotal charge of precious metals: …\n2.2.2.1.7.\nRelative concentration: …\n2.2.2.1.8.\nSubstrate (structure and material): …\n2.2.2.1.9.\nCell density: …\n2.2.2.1.10.\nType of casing for the catalytic converter(s): …\n2.2.2.1.11.\nLocation of the catalytic converter(s) (place(s) and maximum/minimum distance(s) from engine): …\n2.2.2.1.12.\nNormal operating range (K): …\n2.2.2.1.13.\nConsumable reagent (where appropriate): …\n2.2.2.1.13.1.\nType and concentration of reagent needed for catalytic action: …\n2.2.2.1.13.2.\nNormal operational temperature range of reagent: …\n2.2.2.1.13.3.\nInternational standard (where appropriate): …\n2.2.2.1.14.\nNOx sensor: yes/no (1)\n2.2.2.2.\nOxygen sensor: yes/no (1)\n2.2.2.2.1.\nMake(s): …\n2.2.2.2.2.\nType: …\n2.2.2.2.3.\nLocation: …\n2.2.2.3.\nAir injection: yes/no (1)\n2.2.2.3.1.\nType (pulse air, air pump, etc.): …\n2.2.2.4.\nEGR: yes/no (1)\n2.2.2.4.1.\nCharacteristics (cooled/uncooled, high pressure/low pressure, etc.): …\n2.2.2.5.\nParticulate trap: yes/no (1)\n2.2.2.5.1.\nDimensions and capacity of the particulate trap: …\n2.2.2.5.2.\nType and design of the particulate trap: …\n2.2.2.5.3.\nLocation (place(s) and maximum/minimum distance(s) from engine): …\n2.2.2.5.4.\nMethod or system of regeneration, description and/or drawing: …\n2.2.2.5.5.\nNormal operating temperature (K) and pressure (kPa) range: …\n2.2.2.6.\nOther systems: yes/no (1)\n2.2.2.6.1.\nDescription and operation: …’;\n(b) Section 2.4 is replaced by the following:\n‘2.4.\nValve timing\n2.4.1.\nMaximum lift and angles of opening and closing in relation to dead centres or equivalent data: …\n2.4.2.\nReference and/or setting ranges (1): …\n2.4.3.\nVariable valve timing system (if applicable and where intake and/or exhaust)\n2.4.3.1.\nType: continuous or on/off\n2.4.3.2.\nCam phase shift angle: …’;\n(3) Annex III is replaced by the following:\n‘ANNEX III\nRECOGNITION OF ALTERNATIVE TYPE-APPROVALS\nThe following type-approvals and, where applicable, the pertaining approval marks are recognised as being equivalent to an approval to this Directive:\n1.. For engines categories H, I, J and K (stage IIIA) as specified in Article 9(3a) and (3b) of Directive 97/68/EC, type-approvals in accordance with points 3.1, 3.2 and 3.3 of Annex XII to Directive 97/68/EC.\n2.. For engines categories L, M, N and P (stage IIIB) as specified in Article 9(3c) of Directive 97/68/EC, type-approvals in accordance with points 4.1, 4.2 and 4.3 of Annex XII to Directive 97/68/EC.\n3.. For engines categories Q and R (stage IV) as specified in Article 9(3d) of Directive 97/68/EC, type-approvals in accordance with, points 5.1 and 5.2 of Annex XII to Directive 97/68/EC.’.",
  "extent": "E+W+S+N.I.",
  "status": null,
  "version": "current",
  "annotations": [
    {
      "type": "footnote",
      "label": "f1",
      "text": "For full details see Section 2."
    },
    {
      "type": "footnote",
      "label": "f2",
      "text": "For full details see Section 4.’;"
    },
    {
      "type": "footnote",
      "label": "f3",
      "text": "Delete where not applicable.’;"
    },
    {
      "type": "footnote",
      "label": "f4",
      "text": "Indicate the figure number of the system used as set out in Section 1 of Annex VI to Directive 97/68/EC."
    },
    {
      "type": "footnote",
      "label": "f5",
      "text": "Delete where not applicable.’;"
    },
    {
      "type": "footnote",
      "label": "f6",
      "text": "Delete where not applicable.’;"
    }
  ],
  "outstanding_effects": [],
  "provenance": {
    "source": "legislation.gov.uk",
    "source_url": "https://www.legislation.gov.uk/eudr/2014/43/annex",
    "retrieved_at": "2026-11-01T15:21:46.308241+00:00"
  },
  "licence": "Open Government Licence v3.0",
  "licence_url": "https://www.nationalarchives.gov.uk/doc/open-government-licence/version/3/",
  "attribution": "Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives."
}