{
  "url": "https://openlegislation.uk/eu-directive-2014-5/introduction",
  "json_url": "https://openlegislation.uk/eu-directive-2014-5/introduction.json",
  "legislation": "eudr/2014/5",
  "legislation_title": "Commission Delegated Directive 2014/5/EU of 18 October 2013 amending, for the purposes of adapting to technical progress, Annex IV to Directive 2011/65/EU of the European Parliament and of the Council as regards an exemption for lead in solders on printed circuit boards, termination coatings of electrical and electronic components and coatings of printed circuit boards, solders for connecting wires and cables, solders connecting transducers and sensors that are used durably at a temperature below – 20 °C under normal operating and storage conditions (Text with EEA relevance)",
  "legislation_url": "https://openlegislation.uk/eu-directive-2014-5",
  "path": "introduction",
  "kind": "introduction",
  "number": null,
  "heading": "Introductory text",
  "text": "Commission Delegated Directive 2014/5/EU\nof 18 October 2013\namending, for the purposes of adapting to technical progress, Annex IV to Directive 2011/65/EU of the European Parliament and of the Council as regards an exemption for lead in solders on printed circuit boards, termination coatings of electrical and electronic components and coatings of printed circuit boards, solders for connecting wires and cables, solders connecting transducers and sensors that are used durably at a temperature below – 20 °C under normal operating and storage conditions\n(Text with EEA relevance)\nTHE EUROPEAN COMMISSION,\nHaving regard to the Treaty on the Functioning of the European Union,\nHaving regard to Directive 2011/65/EU of the European Parliament and of the Council of 8 June 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment, and in particular Article 5(1)(a) thereof,\nWhereas:\n(1)\nDirective 2011/65/EU prohibits the use of lead in electrical and electronic equipment placed on the market.\n(2)\nThe substitution or elimination of lead in solders on printed circuit boards, termination coatings of electrical and electronic components and coatings of printed circuit boards, solders for connecting wires and cables, solders connecting transducers and sensors that are used durably at a temperature below – 20 °C under normal operating and storage conditions is currently not possible.\n(3)\nDirective 2011/65/EU should therefore be amended accordingly,\nHAS ADOPTED THIS DIRECTIVE:",
  "extent": "E+W+S+N.I.",
  "status": null,
  "version": "current",
  "annotations": [
    {
      "type": "footnote",
      "label": "f1",
      "text": "OJ L 174, 1.7.2011, p. 88."
    }
  ],
  "outstanding_effects": [],
  "provenance": {
    "source": "legislation.gov.uk",
    "source_url": "https://www.legislation.gov.uk/eudr/2014/5/introduction",
    "retrieved_at": "2026-11-01T15:21:50.381818+00:00"
  },
  "licence": "Open Government Licence v3.0",
  "licence_url": "https://www.nationalarchives.gov.uk/doc/open-government-licence/version/3/",
  "attribution": "Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives."
}