{
  "url": "https://openlegislation.uk/eu-directive-2014-68/annex-I/division-1/division-n7/division-3.3",
  "json_url": "https://openlegislation.uk/eu-directive-2014-68/annex-I/division-1/division-n7/division-3.3.json",
  "legislation": "eudr/2014/68",
  "legislation_title": "Directive 2014/68/EU of the European Parliament and of the Council of 15 May 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of pressure equipment (recast) (Text with EEA relevance)",
  "legislation_url": "https://openlegislation.uk/eu-directive-2014-68",
  "path": "annex/I/division/1/division/n7/division/3.3",
  "kind": "division",
  "number": "3.3",
  "heading": "Marking and labelling",
  "text": "In addition to the CE marking referred to in Articles 18 and 19 and the information to be provided in accordance with Article 6(6) and Article 8(3), the following information shall be provided:\n(a) for all pressure equipment:\nthe year of manufacture,\nidentification of the pressure equipment according to its nature, such as type, series or batch identification and serial number,\nessential maximum/minimum allowable limits.\n(b) depending on the type of pressure equipment, further information necessary for safe installation, operation or use and, where applicable, maintenance and periodic inspection such as:\nthe volume V of the pressure equipment in L,\nthe nominal size for piping DN,\nthe test pressure PT applied in bar and date,\nsafety device set pressure in bar,\noutput of the pressure equipment in kW,\nsupply voltage in V (volts),\nintended use,\nfilling ratio kg/L,\nmaximum filling mass in kg,\ntare mass in kg,\nthe fluid group.\n(c) where necessary, warnings fixed to the pressure equipment drawing attention to misuse which experience has shown might occur.\nThe information referred to in points (a), (b) and (c) shall be given on the pressure equipment or on a dataplate firmly attached to it, with the following exceptions:\nwhere applicable, appropriate documentation may be used to avoid repetitive marking of individual parts such as piping components, intended for the same assembly,\nwhere the pressure equipment is too small, e.g. accessories, this information may be given on a label attached to that pressure equipment,\nlabelling or other adequate means may be used for the mass to be filled and the warnings referred to in point (c), provided it remains legible for the appropriate period of time.",
  "extent": "E+W+S+N.I.",
  "status": null,
  "version": "current",
  "annotations": [],
  "outstanding_effects": [],
  "provenance": {
    "source": "legislation.gov.uk",
    "source_url": "https://www.legislation.gov.uk/eudr/2014/68/annex/I/division/1/division/n7/division/3.3",
    "retrieved_at": "2026-11-01T15:21:42.605150+00:00"
  },
  "licence": "Open Government Licence v3.0",
  "licence_url": "https://www.nationalarchives.gov.uk/doc/open-government-licence/version/3/",
  "attribution": "Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives."
}