# Directive 2014/68/EU of the European Parliament and of the Council of 15 May 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of pressure equipment (recast) (Text with EEA relevance), Division 7.5: Material characteristics

Extent: E+W+S+N.I.

Unless other values are required in accordance with other criteria that shall be taken into account, a steel is considered as sufficiently ductile to satisfy point 4.1(a) if, in a tensile test carried out by a standard procedure, its elongation after rupture is no less than 14 % and its bending rupture energy measured on an ISO V test-piece is no less than 27 J, at a temperature not greater than 20 °C but not higher than the lowest scheduled operating temperature.

---
Source: https://www.legislation.gov.uk/eudr/2014/68/annex/I/division/2/division/7/division/7.5 (the official version)
Page: https://openlegislation.uk/eu-directive-2014-68/annex-I/division-2/division-7/division-7.5
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.