{
  "url": "https://openlegislation.uk/eu-directive-2014-68/annex-III/division-12/division-3/division-3.2",
  "json_url": "https://openlegislation.uk/eu-directive-2014-68/annex-III/division-12/division-3/division-3.2.json",
  "legislation": "eudr/2014/68",
  "legislation_title": "Directive 2014/68/EU of the European Parliament and of the Council of 15 May 2014 on the harmonisation of the laws of the Member States relating to the making available on the market of pressure equipment (recast) (Text with EEA relevance)",
  "legislation_url": "https://openlegislation.uk/eu-directive-2014-68",
  "path": "annex/III/division/12/division/3/division/3.2",
  "kind": "division",
  "number": "3.2",
  "heading": "The quality system shall ensure compliance of the pressure equipment with the requirements of this Directive that apply to it.",
  "text": "All the elements, requirements and provisions adopted by the manufacturer shall be documented in a systematic and orderly manner in the form of written policies, procedures and instructions. This quality system documentation shall permit a consistent interpretation of the quality programmes, plans, manuals and records.\nIt shall, in particular, contain an adequate description of:\nthe quality objectives and the organisational structure, responsibilities and powers of the management with regard to design and product quality,\nthe technical design specifications, including standards, that will be applied and, where relevant harmonised standards will not be applied in full, the means that will be used to ensure that the essential safety requirements of the Directive that apply to the pressure equipment will be met,\nthe design control and design verification techniques, processes and systematic actions that will be used when designing the pressure equipment pertaining to the pressure equipment type covered, particularly with regard to materials in accordance with point 4 of Annex I,\nthe corresponding manufacturing, quality control and quality assurance techniques, processes and systematic actions that will be used, particularly the procedures for the permanent joining of parts as approved in accordance with point 3.1.2 of Annex I,\nthe examinations and tests that will be carried out before, during and after manufacture, and the frequency with which they will be carried out,\nthe quality records, such as inspection reports and test data, calibration data, reports concerning the qualifications or approvals of the personnel concerned, particularly those of the personnel undertaking the permanent joining of parts and the non-destructive tests in accordance with points 3.1.2 and 3.1.3 of Annex I, etc.,\nthe means of monitoring the achievement of the required design and pressure equipment quality and the effective operation of the quality system.",
  "extent": "E+W+S+N.I.",
  "status": null,
  "version": "current",
  "annotations": [],
  "outstanding_effects": [],
  "provenance": {
    "source": "legislation.gov.uk",
    "source_url": "https://www.legislation.gov.uk/eudr/2014/68/annex/III/division/12/division/3/division/3.2",
    "retrieved_at": "2026-11-01T15:21:42.605150+00:00"
  },
  "licence": "Open Government Licence v3.0",
  "licence_url": "https://www.nationalarchives.gov.uk/doc/open-government-licence/version/3/",
  "attribution": "Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives."
}