# Commission Delegated Directive (EU) 2020/12 of 2 August 2019 supplementing Directive (EU) 2017/2397 of the European Parliament and of the Council as regards the standards for competences and corresponding knowledge and skills, for the practical examinations, for the approval of simulators and for medical fitness (Text with EEA relevance), Division 0.4

Extent: E+W+S+N.I.

Marine engineering and electrical, electronic and control engineering
The boatmaster shall be able to:
COLUMN 1 COMPETENCE
COLUMN 2 KNOWLEDGE AND SKILLS
1.
operate machinery including pumps, piping systems, bilge and ballast systems;
1.. Knowledge of procedures to follow for safe operation of machinery and of the bilge and ballast system as well as of correct waste disposal.
2.. Ability to operate and control the machinery in the engine room following procedures.
3.. Ability to explain safe function, operation and maintenance of the bilge and ballast system including: reporting incidents associated with transfer operations and ability to correctly measure and report tank levels.
4.. Ability to prepare and operate shut-off-operations of the engines after operation.
5.. Ability to operate pumping bilge, ballast and cargo pumping systems.
6.. Ability to explain the necessity to collect, store and deliver waste products in a correct and safe manner.
7.. Ability to use hydraulic and pneumatic systems.
2.
prepare, start, connect and change generators and control their systems and shore supply;
1.. Knowledge of the power installation.
2.. Ability to use switchboard.
3.. Ability to use shore supply.
3.
use required tools and materials;
1.. Knowledge of characteristics and limitations of processes and materials and tools used for maintenance and repair of engines and equipment.
2.. Ability to apply safe working procedures.
4.
perform the daily maintenance work on the main engines, auxiliary machinery, and control systems;
Ability to maintain and to take care of the engine room, main engine, main machinery, auxiliary equipment and control systems.
5.
perform the daily maintenance work on machinery including pumps, piping systems, bilge- and ballast systems.
Ability to maintain and to take care of pumps, piping systems, bilge- and ballast systems.

---
Source: https://www.legislation.gov.uk/eudr/2020/12/annex/I/division/II/division/0/division/0.4 (the official version)
Page: https://openlegislation.uk/eu-directive-2020-12/annex-I/division-II/division-0/division-0.4
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.