Division 14 Recording and storing on tachograph cardsF1F2

108 The recording equipment shall set the ‘ card session data ’ in the driver or workshop card right after the card insertion.

109 The recording equipment shall update data stored on valid driver, workshop and/or control cards with all necessary data relevant to the period while the card is inserted and relevant to the card holder. Data stored on these cards are specified in Chapter IV.

109a The recording equipment shall update driver activity and location data (as specified in Chapter IV, paragraphs 5.2.5 and 5.2.6), stored on valid driver and/or workshop cards, with activity and location data manually entered by the cardholder.

109b F3The ‘ Vehicle Motion Conflict ’ event shall not be stored on the driver and workshop cards.

110 Tachograph cards data update shall be such that, when needed and taking into account card actual storage capacity, most recent data replace oldest data.

111 In the case of a writing error, the recording equipment shall try again, three times maximum, the same write command, and then if still unsuccessful, declare the card faulty and non valid.

112 Before releasing a driver card, and after all relevant data have been stored on the card, the recording equipment shall reset the card session data.