OpenLegislation

Division 5.3.9 Calibration and time adjustment dataF1F2

United Kingdom

Original text. Later amendments are not shown.

226 The workshop card shall be able to hold records of calibrations and/or time adjustments performed while the card is inserted in a recording equipment.

227 Each calibration record shall be able to hold the following data:

  • F3purpose of calibration (activation, first installation, installation, periodic inspection) ,

  • vehicle identification,

  • parameters updated or confirmed (w, k, l, tyre size, speed limiting device setting, odometer (new and old values), date and time (new and old values),

  • recording equipment identification (VU part number, VU serial number, motion sensor serial number).

228 The workshop card shall be able to store at least 88 such records.

229 The workshop card shall hold a counter indicating the total number of calibrations performed with the card.

230 The workshop card shall hold a counter indicating the number of calibrations performed since its last download.

Annotations

Textual amendments

F1

Inserted by Council Regulation (EC) No 2135/98 of 24 September 1998 amending Regulation (EEC) No 3821/85 on recording equipment in road transport and Directive 88/599/EEC concerning the application of Regulations (EEC) No 3820/85 and (EEC) No 3821/85.

F2

Substituted by Commission Regulation (EC) No 1360/2002 of 13 June 2002 adapting for the seventh time to technical progress Council Regulation (EEC) No 3821/85 on recording equipment in road transport (Text with EEA relevance).

F3

Substituted by Commission Regulation (EC) No 432/2004 of 5 March 2004 adapting for the eighth time to technical progress Council Regulation (EEC) No 3821/85 of 20 December 1985 on recording equipment in road transport (Text with EEA relevance).

Notes on Division 5

Footnotes

f1

OJ L 281, 23.11.1995, p. 31 .