# Commission Regulation (EEC) No 2568/91 of 11 July 1991 on the characteristics of olive oil and olive-residue oil and on the relevant methods of analysis, Division 5.2.2.3: Use of an internal standard

Extent: E+W+S+N.I.

In certain analyses (for example where not all of the fatty acids are quantified, such as when acids with four and six carbons are present alongside acids with 16 and 18 carbons, or when it is necessary to determine the absolute amount of a fatty acid in a sample) it is necessary to use an Internal Standard. Fatty acids with 5, 15 or 17 carbons are frequently used. The correction factor (if any) for the Internal Standard should be determined.
The percentage by mass of component i, expressed as methyl esters, is then given by the formula:
w i = (m IS × F i × A i )/(m × F IS × A IS )
where:
A i is the area the FAME i ;
A IS is the area of the internal standard;
F i is the correction factor of the fatty acid i , expressed as FAME;
F IS is the correction factor of the internal standard;
m is the mass of the test portion, in milligrams
m IS is the mass of the internal standard, in milligrams.
The results are expressed to two decimal places.

---
Source: https://www.legislation.gov.uk/eur/1991/2568/annex/X/part/B/division/5/division/5.2/division/5.2.2/division/5.2.2.3 (the official version)
Page: https://openlegislation.uk/eu-regulation-1991-2568/annex-X/part-B/division-5/division-5.2/division-5.2.2/division-5.2.2.3
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.

