Division Notes
United Kingdom
- 1This chapter does not cover:
- 2Subject to the operation of note 3 to Section XVI, a machine or appliance which answers to a description within one or more of the heading Nos 8401 to 8424 and at the same time to a description within one or other of the heading Nos 8425 to 8480 is to be classified under the appropriate heading of the former group and not the latter.
- 3Division 3
- 4Heading No 8457 applies only to machine-tools for working metal (other than lathes) which can carry out different types of machining operations either:
- 5Division 5
- 6Heading No 8482 applies inter alia to polished steel balls, the maximum and minimum diameters of which do not differ from the nominal diameter by more than 1 % or by more than 0,05 mm, whichever is less.
- 7A machine which is used for more than one purpose is, for the purposes of classification, to be treated as if its principal purpose were its sole purpose.
Notes on Chapter 84
Footnotes
- f1
-
Entry under this subheading is subject to conditions laid down in the relevant Community provisions. See also Section II, paragraph B, of the preliminary provisions.
- f2
-
Duty temporarily suspended in respect of engine parts, engines and turbines intended to be fitted in aircraft imported duty free or built within the Community. This suspension is subject to compliance with formalities and conditions laid down in the relevant Community provisions.
- f3
-
Entry under this subheading is subject to conditions laid down in the relevant Community provisions.