# Commission Regulation (EC) No 2870/2000 of 19 December 2000 laying down Community reference methods for the analysis of spirits drinks, Division A.4.1.1.4: Calculation

Extent: E+W+S+N.I.

Tare of the empty pycnometer = P – m
where m is the mass of air in the pycnometer.
m = 0,0012 × (P1 – P)
Note 2:
0,0012 is the density of dry air at 20 °C at a pressure of 760 mm Hg
Volume of the pycnometer at 20 °C:
where Ft is the factor for temperature t °C taken from Table I of Chapter 1 ‘Density and specific gravity’ of the Annex to Regulation (EEC) No 2676/90 (p. 10).
V20 °C must be known to the nearest 0,001 ml.
Mass of water in the pycnometer at 20 °C: M 20 °C = V 20 °C × 0,998203 where 0,998203 is the density of water at 20 °C.
Note 3:
If necessary, the value 0,99715 of the density in air can be used and the alcoholic strength calculated with reference to the corresponding density in HM Customs and Excise tables in air.

---
Source: https://www.legislation.gov.uk/eur/2000/2870/annex/division/I/division/3/division/A/division/A.4/division/A.4.1/division/A.4.1.1/division/A.4.1.1.4 (the official version)
Page: https://openlegislation.uk/eu-regulation-2000-2870/annex/division-I/division-3/division-A/division-A.4/division-A.4.1/division-A.4.1.1/division-A.4.1.1.4
Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives.

