Division F600: on-farm inspection or remote sensing

The ‘on-the-spot checks’ mentioned here are those referred to in the relevant regulations^f1. They include physical visits of the farm (code ‘F’ or code ‘C’) and/or checks by remote sensing (code ‘T’). Field F601 needs only be completed where an on-farm inspection or control on cross-compliance (‘F’, or ‘C’) is indicated in field F600. Fields F602 to F602B need only be completed where an on-the-spot check (‘F’, ‘C’, or ‘T’) is indicated in field F600. In the case of multiple visits concerning the same measure and the same producer only report once. Every record, be it the advance or balance payment or other, that can be related to a particular inspection, shall have the appropriate code (see below) in field F600.

Administrative checks, within the meaning of the above-mentioned regulations (see footnote below), shall not be mentioned in F600. They are not mentioned as such in any field. Nevertheless, the penalties imposed shall be given in F105, whether they originate from an administrative check or on-the-spot check.

Required format: ‘N’ = no inspection, ‘F’ = on-farm inspection, ‘C’ = controls on cross-compliance and ‘T’ = inspection by remote sensing. In case of a combination of on-farm inspection and cross-compliance and/or inspection by remote sensing one of the corresponding codes ‘FT’, ‘CT’, ‘CF’ or ‘FTC’ must be shown.