Division L.3.1 Dynamic sampling of large lots transported by shipF1

The sampling of large lots in ships is preferably carried out while the product is in flow (dynamic sampling).

The sampling is to be done per hold (entity that can physically be separated). Holds are however emptied partly one after the other so that the initial physical separation no longer exists after transfer into storage facilities. Sampling can therefore be performed based on initial physical separation or based on the separation after transfer into the storage facilities.

The unloading of a ship can last for several days. Normally, sampling has to be performed at regular intervals during the whole duration of unloading. It is however not always feasible or appropriate for an official inspector to be present for sampling during the whole operation of unloading. Therefore sampling of part of the lot is allowed to be undertaken (sampled portion). The number of incremental samples is determined by taking into account the size of the sampled portion.

Even if the official sample is taken automatically, the presence of an inspector is necessary. However if the automatic sampling is done with pre-set parameters which cannot be changed during the sampling and the incremental samples are collected in a sealed receptacle, preventing any possible fraud, then the presence of an inspector is only required at the beginning of the sampling, every time the receptacle of the samples needs to be changed and at the end of the sampling.