{
  "url": "https://openlegislation.uk/eu-regulation-2007-41/annex-III/annex-3",
  "json_url": "https://openlegislation.uk/eu-regulation-2007-41/annex-III/annex-3.json",
  "legislation": "eur/2007/41",
  "legislation_title": "Council Regulation (EC) No 41/2007 of 21 December 2006 fixing for 2007 the fishing opportunities and associated conditions for certain fish stocks and groups of fish stocks, applicable in Community waters and, for Community vessels, in waters where catch limitations are required (revoked)",
  "legislation_url": "https://openlegislation.uk/eu-regulation-2007-41",
  "path": "annex/III/annex/3",
  "kind": "appendix",
  "number": "3 to Annex III",
  "heading": "Condition for fisheries with certain towed gears authorized in ICES zones III, IV, V, VI, VII and VIII a, b, d, e",
  "text": "(a)Specifications of the top square mesh window\nSpecifications of 100 mm, measured as inner opening, square mesh window in the rear tapered section of the trawl, Danish seine or similar gear with a mesh size equal to or larger than 70 mm and smaller than 100 mm.\nThe window shall be a rectangular section of netting. There shall be only one window. The window shall not be obstructed in any way by either internal or external attachments.\n(b)Location of the window\nThe window shall be inserted into the middle of the top panel of the rear tapered section of the trawl just in front of the untapered section constituted by the extension piece and the codend.\nThe window shall terminate not more than 12 meshes from the hand braided row of meshes between the extension piece and the rear tapered section of the trawl.\n(c)Size of the window\nThe length and the width of the window shall be at least 2 m and at least 1 m respectively.\n(d)Netting of the window\nThe meshes shall have a minimum mesh opening of 100 mm. The meshes will be square meshes, i.e. all four sides of the window netting shall be cut all bars.\nThe netting shall be mounted such that the bars run parallel and perpendicular to the longitudinal axis of the codend.\nThe netting shall be single twine. The twine thickness shall be not more than 4 mm.\n(e)Insertion of the window into the diamond meshes netting\nIt shall be permitted to attach a selvedge on the four sides of the window. The diameter of this selvedge shall be no more than 12 mm.\nThe stretched length of the window shall be equal to the strength length of the diamond meshes attached to the longitudinal side of the window.\nThe number of diamond meshes of the top panel attached to the smallest side of the window (i.e. one metre long side which is perpendicular to the longitudinal axis of the codend) shall be at least the number of full diamond meshes attached to the longitudinal side of the window divided by 0,7.\n(f)Other\nThe insertion of the window into the trawl is illustrated below.",
  "extent": "E+W+S+N.I.",
  "status": "repealed",
  "version": "current",
  "annotations": [
    {
      "type": "F",
      "label": "F1",
      "text": "Regulation revoked (1.1.2024) by Retained EU Law (Revocation and Reform) Act 2023 (c. 28), ss. 1(1), 22(3), Sch. 1 Pt. 2 (with s. 1(3)(4)); S.I. 2023/1363, reg. 2"
    }
  ],
  "outstanding_effects": [],
  "provenance": {
    "source": "legislation.gov.uk",
    "source_url": "https://www.legislation.gov.uk/eur/2007/41/annex/III/annex/3",
    "retrieved_at": "2026-11-01T14:53:07.673898+00:00"
  },
  "licence": "Open Government Licence v3.0",
  "licence_url": "https://www.nationalarchives.gov.uk/doc/open-government-licence/version/3/",
  "attribution": "Contains public sector information licensed under the Open Government Licence v3.0. Source: legislation.gov.uk, The National Archives."
}