Division 3.1.3.6.2 Classification of mixtures when data are not available for all components
United Kingdom
Table 3.1.2
F1Conversion from experimentally obtained acute toxicity range values (or acute toxicity hazard categories) to acute toxicity point estimates for use in the formulas for the classification of mixtures
| Exposure routes | Classification Category or experimentally obtained acute toxicity range estimate | Converted acute toxicity point estimate(see Note 1) |
|---|---|---|
| Oral (mg/kg bodyweight) | 0 < Category 1 ≤ 5 5 < Category 2 ≤ 50 50 < Category 3 ≤ 300 300 < Category 4 ≤ 2 000 | 0,5 5 100 500 |
| Dermal (mg/kg bodyweight) | 0 < Category 1 ≤ 50 50 < Category 2 ≤ 200 200 < Category 3 ≤ 1 000 1 000 < Category 4 ≤ 2 000 | 5 50 300 1 100 |
| Gases (ppmV) | 0 < Category 1 ≤ 100 100 < Category 2 ≤ 500 500 < Category 3 ≤ 2 500 2 500 < Category 4 ≤ 20 000 | 10 100 700 4 500 |
| Vapours (mg/l) | 0 < Category 1 ≤ 0,5 0,5 < Category 2 ≤ 2,0 2,0 < Category 3 ≤ 10,0 10,0 < Category 4 ≤ 20,0 | 0,05 0,5 3 11 |
| Dust/mist (mg/l) | 0< Category 1 ≤ 0,05 0,05 < Category 2 ≤ 0,5 0,5 < Category 3 ≤ 1,0 1,0 < Category 4 ≤ 5,0 | 0,005 0,05 0,5 1,5 |
- 3.1.3.6.2.1Where an ATE is not available for an individual ingredient of the mixture, but available information, such as that listed below, can provide a derived conversion value such as those laid out in Table 3.1.2, the formula in section 3.1.3.6.1 shall be applied.
- 3.1.3.6.2.2Division 3.1.3.6.2.2
- 3.1.3.6.2.3If the total concentration of the relevant ingredient(s) with unknown acute toxicity is ≤ 10 % then the formula presented in section 3.1.3.6.1 shall be used. If the total concentration of the relevant ingredient(s) with unknown toxicity is > 10 %, the formula presented in section 3.1.3.6.1 shall be corrected to adjust for the percentage of the unknown ingredient(s) as follows:
- Note 1