Division 4 As of 1 January 2017 :F1

In addition to the requirements set out in point 3(a) and (b), the following provisions shall apply:

1. (a)

   Networked equipment that has one or more standby mode(s) shall comply with the requirements for these standby mode(s) when all wired network ports are disconnected and when all wireless network ports are deactivated.

2. (b)

   Networked equipment other than HiNA equipment shall comply with the provisions under 2(d) when all wired network ports are disconnected and when all wireless network ports are deactivated.

3. (c)

   Power consumption in a condition providing ‘ networked standby ’ :

   • The power consumption of HiNA equipment or equipment with HiNA functionality, in a condition providing networked standby into which the equipment is switched by the power management function, or a similar function, shall not exceed 8,00 W.

   • The power consumption of other networked equipment in a condition providing networked standby into which the equipment is switched by the power management function, or a similar function, shall not exceed 3,00 W.

   • The power consumption limits as stipulated in point (c) shall not apply to:

     1. (i)

        large format printing equipment;

     2. (ii)

        desktop thin clients;

     3. (iii)

        workstations;

     4. (iv)

        mobile workstations;

     5. (v)

        small-scale servers;

     6. (vi)

        computer servers.