OpenLegislation

Article 17 Selection of twines in square mesh netting

United Kingdom

Original text. Later amendments are not shown.

Twines in square mesh netting shall be selected in the following way, as shown in Annex VIII:

  1. (a)

    in the case of single twine netting, the twine on only one side of 20 meshes shall be selected, with the same side being selected in each mesh;

  2. (b)

    in the case of double twine netting, each strand of twine on only one side of 10 meshes shall be assessed, with the same side being selected in each mesh.